Aluminum Parts Gravity Die Casting Market Size
| Study Period | 2019 - 2029 |
| Market Size (2024) | USD 6.75 Billion |
| Market Size (2029) | USD 8.54 Billion |
| CAGR (2024 - 2029) | 4.82 % |
| Fastest Growing Market | Asia-Pacific |
| Largest Market | Asia-Pacific |
Major Players
*Disclaimer: Major Players sorted in no particular order |
Need a report that reflects how COVID-19 has impacted this market and its growth?
Aluminum Parts Gravity Die Casting Market Analysis
The Aluminum Parts Gravity Die Casting Market size is estimated at USD 6.75 billion in 2024, and is expected to reach USD 8.54 billion by 2029, growing at a CAGR of 4.82% during the forecast period (2024-2029).
During the COVID-19 outbreak in 2020, the entire supply chain of the automotive industry was significantly impacted. The OEMs struggled to keep their operations going. However, as the lockdowns and restrictions were relaxed, the automotive industry and the aluminum parts gravity die-casting market regained their momentum.
The market is largely driven by supply chain complexities in the die-casting industry, the expanding automotive market, increasing penetration of die-casting parts in industrial machinery, the growing constructional sector, and employing aluminum castings in the electrical and electronics sector.
Gravity die casting is one of the oldest methods of die casting. This die-casting process is used for producing accurately dimensioned, sharply defined, and smooth or textured-surface metal parts. The main advantage of gravity die casting is its high speed of production.
The CAFÉ standards and EPA policies to cut down automobile emissions and increase fuel efficiency are driving the automakers to reduce the weight of automobiles by employing lightweight metals. Subsequently, employing die-cast parts as a weight reduction strategy is acting as a major driver for the former market in the automotive segment.
Aluminum Parts Gravity Die Casting Market Trends
Stringent EPA Regulations and Cafe Standards are Likely to Drive Demand in the Market
The automobile regulatory frameworks in Europe and North America have been instrumental in creating a sustainable environment in the automobile industry. The latest regulatory framework, Euro 6, which was introduced in 2011 and came into effect from September 2014 onward, changed the regulatory standards that have been crucial in determining the dynamics of the automotive market in the region. Since 2013, the EC (European Commission), along with EEA/EMEP, has been maintaining the record of emission performance standards for each new vehicle registered in Europe.
The emission regulations bind the automotive manufacturers together. Freight companies and fleet owners are rapidly moving toward incorporating more technologies that are expected to reduce the average emission rate. Thereby, a need to reduce vehicle weight to lowering emission levels has greatly encouraged the employment of die-cast parts in vehicles.
Automobile manufacturers are always looking for ways to make vehicle components more efficient to improve the fuel efficiency of vehicles and reduce carbon emissions. Lightweight construction, using efficient and cost-optimized aluminum die-casted parts, plays a key role in achieving this goal. Companies like Nemak are focusing on the 'lightweight' trend and introducing electric vehicle products (manufactured by using the HPDC process) into the automotive industry. Such aforementioned environmental policies are expected to drive the demand in the market.
The Asia-Pacific Region is Expected to Hold a Significant Share in the Market
Asia-Pacific is the largest automotive market in the world due to the presence of key economies like India, China, etc., and active engagements of key players and several government initiatives, which are expected to further contribute to the development of the aluminum gravity die-casting market. China is the world's leading exporter of aluminum and aluminum products. In 2022, China's exports of aluminum increased by 741.4% year on year to 1 million mt and reached 57,349 mt in December 2022 compared to only 3,969 mt in December 2021.
The Asia-Pacific region has also recovered quickly from the impact of the COVID-19 pandemic due to the high demand for Chinese products across the world. With growing manufacturing capabilities, the demand in the aluminum parts gravity die-casting market is expected to grow during the forecast period.
In 2022, Vedanta (1,696,960 mt), Hindalco (969,180 mt), and Nalco (343,460 mt) were the three prominent companies in aluminum production. India stands as the second-largest foundry industry that produces castings in the world. Foundries in India are capable of producing gravity die-casting products that serve a wide range of applications conforming to international standards.
The government's focus on 'Make in India', developing the automotive industry, and the stringent emission norms is driving the market growth. In FY 2022-23, total passenger vehicle (PV) exports stood at 6,62,891 units in compare to 5,77,875 units in 2021-22. Companies such as Hyundai, Kia, Maruti Suzuki, and Volkswagen are exporting Indian-made cars to the African region instead of setting up their factories there because of low-cost manufacturing and availability of parts suppliers in India. All these factors contribute to the overall development of the Asia-Pacific aluminum parts gravity die casting market during the forecast period.
Aluminum Parts Gravity Die Casting Industry Overview
The market for aluminum parts gravity die casting is fragmented in nature, with the presence of many regional small-medium scale players across several countries, as well as large-scale/international players.
Key players have also expanded their operations globally through various mergers, expansions, partnerships, joint ventures, and acquisitions. These key players are focusing their revenues on R&D to come up with better production processes and alloys. This strategy may assist in the production of premium-quality die-cast parts for the global automotive and industrial sectors.
Aluminum Parts Gravity Die Casting Market Leaders
-
Endurance Technologies
-
Minda Corporation Limited
-
Sundaram Clayton Limited
-
Rockman Industries
-
CIE Automotive
*Disclaimer: Major Players sorted in no particular order
Aluminum Parts Gravity Die Casting Market News
- November 2022, Anderton Castings has added capacity to its aluminum high-pressure die casting, machining, welding, and assembly, and it is able to assist in immediate resourcing projects.
- In August 2022, Wencan Group Co. Ltd announced that it intends to build a production base of aluminum die-cast parts for New Energy Vehicles (NEVs) in Lu'an Economic and Technological Development Zone, Anhui Province.
Aluminum Parts Gravity Die Casting Market Report - Table of Contents
1. INTRODUCTION
- 1.1 Study Assumptions
- 1.2 Scope of the Study
2. RESEARCH METHODOLOGY
3. EXECUTIVE SUMMARY
4. MARKET DYNAMICS
-
4.1 Market Drivers
- 4.1.1 Emphasis on Lightweight Materials in Automobile and Aerospace sector
-
4.2 Market Restraints
- 4.2.1 Limited Design Flexibility
-
4.3 Industry Attractiveness - Porter's Five Forces Analysis
- 4.3.1 Threat of New Entrants
- 4.3.2 Bargaining Power of Buyers/Consumers
- 4.3.3 Bargaining Power of Suppliers
- 4.3.4 Threat of Substitute Products
- 4.3.5 Intensity of Competitive Rivalry
5. MARKET SEGMENTATION (Market Size in Value USD Billion)
-
5.1 Application
- 5.1.1 Automotive
- 5.1.1.1 Parts and Components
- 5.1.1.1.1 Transmission Parts
- 5.1.1.1.2 Engine Parts
- 5.1.1.1.3 Brake Parts
- 5.1.1.1.4 Other Parts and Components
- 5.1.1.2 Vehicle Type
- 5.1.1.2.1 Passenger Cars
- 5.1.1.2.2 Commercial Vehicles
- 5.1.1.2.3 Other Vehicles
- 5.1.2 Electrical and Electronics
- 5.1.3 Industrial Applications
- 5.1.4 Other Applications
-
5.2 Geography
- 5.2.1 North America
- 5.2.1.1 United States
- 5.2.1.2 Canada
- 5.2.1.3 Rest of North America
- 5.2.2 Europe
- 5.2.2.1 Germany
- 5.2.2.2 United Kingdom
- 5.2.2.3 France
- 5.2.2.4 Italy
- 5.2.2.5 Rest of Europe
- 5.2.3 Asia-Pacific
- 5.2.3.1 China
- 5.2.3.2 Japan
- 5.2.3.3 India
- 5.2.3.4 South Korea
- 5.2.3.5 Rest of Asia-Pacific
- 5.2.4 South America
- 5.2.4.1 Brazil
- 5.2.4.2 Argentina
- 5.2.4.3 Rest of South America
- 5.2.5 Middle-East and Africa
- 5.2.5.1 South Africa
- 5.2.5.2 Turkey
- 5.2.5.3 Rest of Middle-East and Africa
6. COMPETITIVE LANDSCAPE
- 6.1 Vendor Market Share
-
6.2 Company Profiles
- 6.2.1 Rockman Industries
- 6.2.2 Endurance Technologies Limited
- 6.2.3 Minda Corporation Limited
- 6.2.4 Hitachi Metals Ltd
- 6.2.5 MAN Group Co.
- 6.2.6 MRT Castings Ltd
- 6.2.7 Harrison Castings Limited
- 6.2.8 Vostermans Companies
- 6.2.9 CIE Automotive
- 6.2.10 Sundaram Clayton Ltd
- 6.2.11 GWP Manufacturing Services AG
- *List Not Exhaustive
7. MARKET OPPORTUNITIES AND FUTURE TRENDS
- 7.1 Increasing Adoption of Electric Vehicles
- 7.2 Improved Tooling Design, Computer-aided Simulation, and Process Control Systems
Aluminum Parts Gravity Die Casting Industry Segmentation
Gravity die casting is a permanent mold casting process where the molten metal is poured from a vessel or ladle into the mold. The mold cavity fills with no force other than gravity, and the filling can be controlled by tilting the die. The aluminum parts gravity die casting market report covers a detailed study of the latest trends and innovations in the market, which is segmented by application type and vehicle type.
By application type, the market is segmented into automotive (parts and components (transmission parts, engine parts, brake parts, and other parts and components), vehicle type (passenger cars, commercial vehicles (trucks and buses), and other vehicles)), electrical and electronics, industrial applications, and other applications. By geography, the market is segmented into North America, Europe, Asia-Pacific, South America, and Middle-East and Africa. For each segment, market sizing and forecast have been done on the basis of value (USD Billion).
| Application | Automotive | Parts and Components | Transmission Parts |
| Engine Parts | |||
| Brake Parts | |||
| Other Parts and Components | |||
| Application | Automotive | Vehicle Type | Passenger Cars |
| Commercial Vehicles | |||
| Other Vehicles | |||
| Application | Electrical and Electronics | ||
| Industrial Applications | |||
| Other Applications | |||
| Geography | North America | United States | |
| Canada | |||
| Rest of North America | |||
| Geography | Europe | Germany | |
| United Kingdom | |||
| France | |||
| Italy | |||
| Rest of Europe | |||
| Geography | Asia-Pacific | China | |
| Japan | |||
| India | |||
| South Korea | |||
| Rest of Asia-Pacific | |||
| Geography | South America | Brazil | |
| Argentina | |||
| Rest of South America | |||
| Geography | Middle-East and Africa | South Africa | |
| Turkey | |||
| Rest of Middle-East and Africa |
Aluminum Parts Gravity Die Casting Market Research FAQs
How big is the Aluminum Parts Gravity Die Casting Market?
The Aluminum Parts Gravity Die Casting Market size is expected to reach USD 6.75 billion in 2024 and grow at a CAGR of 4.82% to reach USD 8.54 billion by 2029.
What is the current Aluminum Parts Gravity Die Casting Market size?
In 2024, the Aluminum Parts Gravity Die Casting Market size is expected to reach USD 6.75 billion.
Who are the key players in Aluminum Parts Gravity Die Casting Market?
Endurance Technologies, Minda Corporation Limited, Sundaram Clayton Limited, Rockman Industries and CIE Automotive are the major companies operating in the Aluminum Parts Gravity Die Casting Market.
Which is the fastest growing region in Aluminum Parts Gravity Die Casting Market?
Asia-Pacific is estimated to grow at the highest CAGR over the forecast period (2024-2029).
Which region has the biggest share in Aluminum Parts Gravity Die Casting Market?
In 2024, the Asia-Pacific accounts for the largest market share in Aluminum Parts Gravity Die Casting Market.
What years does this Aluminum Parts Gravity Die Casting Market cover, and what was the market size in 2023?
In 2023, the Aluminum Parts Gravity Die Casting Market size was estimated at USD 6.44 billion. The report covers the Aluminum Parts Gravity Die Casting Market historical market size for years: 2019, 2020, 2021, 2022 and 2023. The report also forecasts the Aluminum Parts Gravity Die Casting Market size for years: 2024, 2025, 2026, 2027, 2028 and 2029.
Aluminum Die Casting Parts Industry Report
Statistics for the 2024 Aluminum Die Casting Parts market share, size and revenue growth rate, created by Mordor Intelligence™ Industry Reports. Aluminum Die Casting Parts analysis includes a market forecast outlook to 2029 and historical overview. Get a sample of this industry analysis as a free report PDF download.
