Japan Outdoor LED Lighting Market Size
|
Study Period | 2017 - 2030 |
|
Market Size (2024) | USD 1.22 Billion |
|
|
Market Size (2030) | USD 1.58 Billion |
|
Largest Share by Outdoor Lighting | Public Places |
|
|
CAGR (2024 - 2030) | 4.47 % |
|
|
Fastest Growing by Outdoor Lighting | Public Places |
Major Players |
||
|
||
|
*Disclaimer: Major Players sorted in no particular order |
Japan Outdoor LED Lighting Market Analysis
The Japan Outdoor LED Lighting Market size is estimated at 1.22 billion USD in 2024, and is expected to reach 1.58 billion USD by 2030, growing at a CAGR of 4.47% during the forecast period (2024-2030).
1.22 Billion
Market Size in 2024 (USD)
1.58 Billion
Market Size in 2030 (USD)
1.68 %
CAGR (2017-2023)
4.47 %
CAGR (2024-2030)
Largest Segment by Outdoor Lighting
65.97 %
value share, Public Places, 2023
As of April 2022, Japan had nearly 100 airports, including 28 major airports and 54 regional airports.
Fastest-growing Segment by Outdoor Lighting
5.05 %
Projected CAGR, Public Places, 2024-2030
The volume of LED penetration in this category is expected to reach 178.3 million units. It is the fastest-growing segment with rising developments in public places.
First Leading Market Player
32.44 %
market share, Panasonic Holdings Corporation, 2022
Panasonic was the largest market player in Japan, accounting for 32.44% of the market share in 2022. The company is focused on new product developments, such as the security lighting product Dark Sky Friendly Lighting.
Second Leading Market Player
25.40 %
market share, Nichia Corporation, 2022
Nichia Corporation was the second-largest market player in Japan, accounting for 25.40% of the market share in 2022. Nichia is one of the world's largest LED suppliers. The company has three sales offices in Japan: Osaka, Tokyo, and Nagoya.
Third Leading Market Player
5.53 %
market share, Endo Lighting Corporation, 2022
Endo Lighting Corporation was the third-largest market player in Japan, accounting for 5.53% of the market share in 2022. The company has a "Technical Center" in Higashi-Osaka City, a new product development base for LED lighting equipment.
Increased tourism and government initiatives in public places in Japan to boost the demand for LED lights in the country
- In terms of value share, in 2023, public places accounted for the majority of the share, followed by streets and roadways and others. Public places in Japan have grown over the years with increasing travel and tourism. The Government of Japan (GOJ) has been gradually lifting travel restrictions since the start of the COVID-19 pandemic. Given these positive developments in border controls and the industry's efforts to encourage Japanese consumers to travel abroad, now is the perfect time for the US travel industry to promote its destinations and services to the Japanese market. Thus, the growth in tourism creates an opportunity for the country to display its public places in a beautified manner. Amusement parks and parking lots in airports and railway stations have gone through various developments due to increased tourism, thus increasing the penetration of LED lights in this segment.
- In terms of volume share, in 2023, public places accounted for the majority of the share, followed by streets and roadways and others. The majority of LED lights are used in the public places segment due to the overwhelming response from tourism and the growth in technological advancement. The Tokyo government launched a campaign to promote energy-saving activities by converting home lighting to LEDs. Under the 2020 Action Plan formulated in 2016, the Tokyo Metropolitan Government aims to become a "Smart City Tokyo" that is constantly evolving, dynamic, open to the world, and has excellent environmental performance.
- Japanese government-led initiatives are expected to develop new roadways and redevelop existing national highways and other roadways. These factors are also propelling the demand for LED lights in the outdoor segment in Japan.
Understand The Key Trends Shaping This Market
Download PDF
Japan Outdoor LED Lighting Market Trends
Construction of new stadiums and installation of LED lights to drive the growth of the market
- The number of stadiums segment is expected to witness growth from 105 units in 2022 to 128 units in 2030, exhibiting a CAGR of 2.5%. The sports sector has undergone several changes in recent years. For instance, the Toyota Stadium in Aichi, Japan, where Signify installed its connected lighting system Interact Sports in 2019. Before the Rugby World Cup 2019 and the Tokyo Olympic Soccer matches slated for 2020, Total Light Control - TLC for LED technology was installed at the International Stadium Yokohama (Nissan Stadium) in Yokohama City, Japan. Ahead of the 2019 Rugby World Cup Japan, Signify installed LED lights in Kobe Misaki Stadium. These elements support the expansion of the LED market in the area.
- The nation is helping to build stadiums for numerous sports. For instance, work on Nagasaki Stadium City will start in 2022. The project was previously projected to cost JPY 70 billion (GBP 427.4 million or EUR 493.6 million). Still, it is now anticipated that the total cost will exceed JPY 80 billion due to changes in the planning and increased material costs. To save energy, the stadium will also have LED lighting installed. According to a contract awarded by the Japan Sport Council, a new stadium will be built in central Tokyo in 2022 to replace the Chichibunomiya Rugby Stadium. The new stadium is expected to break ground in 2024. After 2027, it will start operating. Additionally, Kanazawa Stadium will be constructed by 2023 and opened before the start of the 2024 season. These factors will drive the LED market in the coming years.
Understand The Key Trends Shaping This Market
Download PDF
The increasing number of households drives the growth of the LED lighting market
- The overall population of Japan was estimated to be 125.51 million in 2021. In Japan, there are 1.3 children for every woman in 2021. Around 811.6 thousand live births were registered in Japan in 2021. The market will expand due to the rise in residential space availability. Approximately 859.5 thousand home starts were started in Japan in 2022. Increased government spending, housing program subsidies, and the government's anticipated focus on major infrastructure projects will all contribute to Japan's residential market expansion, ultimately resulting in higher LED sales. Consequently, more commercial land will be purchased as a result of the drop in the price of commercial real estate, and thus, will contribute to the greater use of LEDs in coming years.
- Around 55.7 million private households existed in Japan as a whole in 2020. About 54.2% of those were nuclear families, and 38.1% were single-person households. In 2022, there were 2.2 household members on average. Japan had 4.4 rooms per home, on average. In 2021, Japan had 55.6 million homes. In the same year, the indicator showed a 0.6% year-over-year growth. The indicator increased by 8.5% from 2010 to 2021. The expansion of LEDs in Japan will be fueled by an increase in the number of households.
- Nearly 46.1% of households in Japan had at least one passenger car as of August 31, 2020. The number of newly registered motor cars in Japan fell from roughly 4.45 million the year before to about 4.2 million in 2022. Additionally, in 2022, Japan saw the registration of almost 4.2 million new cars. These registrations show that there is a growing market for LEDs in the automobile sector.
Understand The Key Trends Shaping This Market
Download PDF
OTHER KEY INDUSTRY TRENDS COVERED IN THE REPORT
- An increasing number of households and the growing real estate industry to drive the growth of the LED market
- Rise in residential and commercial construction, smart city projects, and government campaigns promote the use of LED lights
- The market is driven by government initiatives to increase the use of energy-efficient lights and banning of batteries containing mercury and fluorescent light
- High export of LED products and increasing government policies and campaigns promote the use of LED lights
- Increasing death rate and declining birth rate are expected to hinder the growth and demand for real estate
Japan Outdoor LED Lighting Industry Overview
The Japan Outdoor LED Lighting Market is fairly consolidated, with the top five companies occupying 66.01%. The major players in this market are ams-OSRAM AG, Endo Lighting Corporation, Nichia Corporation, Panasonic Holdings Corporation and Toshiba Corporation (sorted alphabetically).
Japan Outdoor LED Lighting Market Leaders
ams-OSRAM AG
Endo Lighting Corporation
Nichia Corporation
Panasonic Holdings Corporation
Toshiba Corporation
Other important companies include Japan Street Light Mfg. Co., Ltd., Lumileds Holding B.V., NVC INTERNATIONAL HOLDINGS LIMITED, Signify Holding (Philips), Takasho Digitec Co. Ltd.
*Disclaimer: Major Players sorted in alphabetical order.
Need More Details on Market Players and Competitors?
Download PDF
Japan Outdoor LED Lighting Market News
- June 2023: The company light up the Tokyo Dome with around 400 Panasonic LED floodlights, 2KW equivalent. In March 2017, 300 LED floodlights installed in the infield.
- August 2022: The company light up semi-ghost town in japan under the ‘Yabitsu Light Up Project’.
- December 2020: The Panasonic Life Solutions Company provided cooperation in the development of the security lighting. In January 2020, the company produced the security lighting product to clear the IDA's strict standards.
Free with this Report
We provide a complimentary and exhaustive set of data points on the country and regional level metrics that present the fundamental structure of the industry. Presented in the form of 40+ free charts, the sections cover difficult to find data on various countries on Automotive Production, Lighting Electricity Consumption, Road Network, Number of Stadiums, Number of Charging Stations among others.
Japan Outdoor LED Lighting Market Report - Table of Contents
1. EXECUTIVE SUMMARY & KEY FINDINGS
2. REPORT OFFERS
3. INTRODUCTION
- 3.1 Study Assumptions & Market Definition
- 3.2 Scope of the Study
- 3.3 Research Methodology
4. KEY INDUSTRY TRENDS
- 4.1 Population
- 4.2 Per Capita Income
- 4.3 Total Import Of LEDs
- 4.4 Lighting Electricity Consumption
- 4.5 # Of Households
- 4.6 LED Penetration
- 4.7 # Of Stadiums
-
4.8 Regulatory Framework
- 4.8.1 Japan
- 4.9 Value Chain & Distribution Channel Analysis
5. MARKET SEGMENTATION (includes market size in Value in USD and Volume, Forecasts up to 2030 and analysis of growth prospects)
-
5.1 Outdoor Lighting
- 5.1.1 Public Places
- 5.1.2 Streets and Roadways
- 5.1.3 Others
6. COMPETITIVE LANDSCAPE
- 6.1 Key Strategic Moves
- 6.2 Market Share Analysis
- 6.3 Company Landscape
-
6.4 Company Profiles (includes Global level Overview, Market level overview, Core Business Segments, Financials, Headcount, Key Information, Market Rank, Market Share, Products and Services, and analysis of Recent Developments)
- 6.4.1 ams-OSRAM AG
- 6.4.2 Endo Lighting Corporation
- 6.4.3 Japan Street Light Mfg. Co., Ltd.
- 6.4.4 Lumileds Holding B.V.
- 6.4.5 Nichia Corporation
- 6.4.6 NVC INTERNATIONAL HOLDINGS LIMITED
- 6.4.7 Panasonic Holdings Corporation
- 6.4.8 Signify Holding (Philips)
- 6.4.9 Takasho Digitec Co. Ltd
- 6.4.10 Toshiba Corporation
7. KEY STRATEGIC QUESTIONS FOR LED CEOS
8. APPENDIX
-
8.1 Global Overview
- 8.1.1 Overview
- 8.1.2 Porter’s Five Forces Framework
- 8.1.3 Global Value Chain Analysis
- 8.1.4 Market Dynamics (DROs)
- 8.2 Sources & References
- 8.3 List of Tables & Figures
- 8.4 Primary Insights
- 8.5 Data Pack
- 8.6 Glossary of Terms
List of Tables & Figures
- Figure 1:
- HUMAN POPULATION IN MILLION, NUMBERS, JAPAN, 2017 - 2030
- Figure 2:
- PER CAPITA INCOME, USD, JAPAN, 2017 - 2030
- Figure 3:
- VALUE OF LED IMPORTS, USD MILLION, JAPAN, 2017 - 2030
- Figure 4:
- CONSUMPTION OF ELECTRICITY FOR LIGHTING, TWH, JAPAN, 2017 - 2030
- Figure 5:
- COUNT OF HOUSEHOLDS, MILLION, JAPAN, 2017 - 2030
- Figure 6:
- LED PENETRATION, %, JAPAN, 2017 - 2030
- Figure 7:
- COUNT OF STADIUMS, NUMBER, JAPAN, 2017 - 2030
- Figure 8:
- VOLUME SALES OF JAPAN OUTDOOR LED LIGHTING MARKET, NUMBER, JAPAN, 2017 - 2030
- Figure 9:
- VALUE SALES OF JAPAN OUTDOOR LED LIGHTING MARKET, USD, JAPAN, 2017 - 2030
- Figure 10:
- VOLUME SALES OF LED FIXTURES BY OUTDOOR LIGHTING, NUMBER, JAPAN, 2017 - 2030
- Figure 11:
- VALUE SALES OF LED FIXTURES BY OUTDOOR LIGHTING, USD, JAPAN, 2017 - 2030
- Figure 12:
- VALUE SHARE OF LED FIXTURES BY OUTDOOR LIGHTING, %, JAPAN, 2017 - 2030
- Figure 13:
- VOLUME SHARE OF LED FIXTURES BY OUTDOOR LIGHTING, %, JAPAN, 2017 - 2030
- Figure 14:
- VOLUME SALES OF LED FIXTURES IN PUBLIC PLACES, NUMBER, JAPAN, 2017 - 2030
- Figure 15:
- VALUE SALES OF LED FIXTURES IN PUBLIC PLACES, USD, JAPAN, 2017 - 2030
- Figure 16:
- VOLUME SALES OF LED FIXTURES IN STREETS AND ROADWAYS, NUMBER, JAPAN, 2017 - 2030
- Figure 17:
- VALUE SALES OF LED FIXTURES IN STREETS AND ROADWAYS, USD, JAPAN, 2017 - 2030
- Figure 18:
- VOLUME SALES OF LED FIXTURES IN OTHERS, NUMBER, JAPAN, 2017 - 2030
- Figure 19:
- VALUE SALES OF LED FIXTURES IN OTHERS, USD, JAPAN, 2017 - 2030
- Figure 20:
- MOST ACTIVE COMPANIES BY NUMBER OF STRATEGIC MOVES, COUNT, JAPAN, 2017 - 2030
- Figure 21:
- MOST ADOPTED STRATEGIES, COUNT, JAPAN, 2017 - 2030
- Figure 22:
- VALUE SHARE OF MAJOR PLAYERS, %, JAPAN, 2022
Japan Outdoor LED Lighting Industry Segmentation
Public Places, Streets and Roadways, Others are covered as segments by Outdoor Lighting.
- In terms of value share, in 2023, public places accounted for the majority of the share, followed by streets and roadways and others. Public places in Japan have grown over the years with increasing travel and tourism. The Government of Japan (GOJ) has been gradually lifting travel restrictions since the start of the COVID-19 pandemic. Given these positive developments in border controls and the industry's efforts to encourage Japanese consumers to travel abroad, now is the perfect time for the US travel industry to promote its destinations and services to the Japanese market. Thus, the growth in tourism creates an opportunity for the country to display its public places in a beautified manner. Amusement parks and parking lots in airports and railway stations have gone through various developments due to increased tourism, thus increasing the penetration of LED lights in this segment.
- In terms of volume share, in 2023, public places accounted for the majority of the share, followed by streets and roadways and others. The majority of LED lights are used in the public places segment due to the overwhelming response from tourism and the growth in technological advancement. The Tokyo government launched a campaign to promote energy-saving activities by converting home lighting to LEDs. Under the 2020 Action Plan formulated in 2016, the Tokyo Metropolitan Government aims to become a "Smart City Tokyo" that is constantly evolving, dynamic, open to the world, and has excellent environmental performance.
- Japanese government-led initiatives are expected to develop new roadways and redevelop existing national highways and other roadways. These factors are also propelling the demand for LED lights in the outdoor segment in Japan.
| Outdoor Lighting | Public Places |
| Streets and Roadways | |
| Others |
Need A Different Region Or Segment?
Customize Now
Market Definition
- INDOOR LIGHTING - It incorporates all LED based lamps and fixtures/luminaire that are used to illuminate indoor section of residential, commercial, industrial buildings and agricultural lighting. LED offers efficient brightness with higher durability in comparison to other lighting technology.
- OUTDOOR LIGHTING - It incorporates the LED lighting fixtures that is used for illumination for exterior/outdoor illumination. For instance, LED lighting fixtures used to illuminate streets and highways, transport hubs, stadiums and other public places such as parking spaces.
- AUTOMOTIVE LIGHTING - It refers to the lighting fixtures installed for illumination and signaling purposes. It is used in both exterior and interior lighting of the vehicle. Headlamps, fog lamp, daytime running light (DRLs) are examples of exterior light whereas cabin light are interior lights.
- END USER - It refers to the end use application area where the LED fixture will be installed. For instance, in terms of indoor lighting, we have residential, commercial and industrial as end user category. For automotive lighting, primary end user considered are automotive manufacturers and aftermarket sale
| Keyword | Definition |
|---|---|
| Lumen | Lumen is a unit of luminous flux in the International System of Units that is equal to the amount of light given out through a solid angle by a source of one-candela intensity radiating equally in all directions. |
| Footcandle | A foot-candle (or foot-candle, fc, lm/ft2, or ft-c) is a measurement of light intensity. One foot-candle is defined as enough light to saturate a one-foot square with one lumen of light. |
| Colour Rendering Index (CRI) | Color Rendering Index (CRI) is a measurement of how natural colors render under an artificial white light source when compared with sunlight. The index is measured from 0-100, with a perfect 100 indicating that colors of objects under the light source appear the same as they would under natural sunlight. |
| Luminous flux | Luminous flux is a measure of the power of visible light produced by a light source or light fitting. It is measured in lumens (lm). |
| Annual Energy Cost | Annual Energy Cost means the average daily energy consumption multiplied by 365 (days per year), expressed in kilowatt hour per year (kWh/a). |
| Constant voltage drivers | Constant voltage drivers are designed for a single direct current (DC) output voltage. Most common constant voltage drivers (or Power Supplies) are 12VDC or 24VDC. An LED light that is rated for constant voltage usually specifies the amount of input voltage it needs to operate correctly. |
| Constant Current Driver | Constant current LED drivers are designed for a designated range of output voltages and a fixed output current (mA). LEDs that are rated to operate on a constant current driver require a designated supply of current usually specified in milliamps (mA) or amps (A). These drivers vary the voltage along an electronic circuit which allows current to remain constant throughout the LED system. |
| Minimum Energy Performance Standards (MEPS) | Minimum Energy Performance Standards specify the minimum level of energy performance that appliances and equipment must meet or exceed before they can supply or used for commercial purposes. |
| Luminous Efficacy | Luminous efficacy is a measurement commonly used in the lighting industry that indicates the ability of a light source to emit visible light using a given amount of power. |
| Solid State Lighting | Solid-state lighting (SSL) is a type of lighting that uses semiconductor light-emitting diodes (LEDs), organic light-emitting diodes (OLED), or polymer light-emitting diodes (PLED) as sources of illumination rather than electrical filaments, plasma (used in arc lamps such as fluorescent lamps), or gas. |
| Rated Lamp Life | Lamp life, also referred to as rated life, is the time in hours a lamp will last before a percentage of lamps will burn out. |
| Color Temperature | Colour temperature is a scale that measures how ‘warm’ (yellow) or ‘cool’ (blue) the light from a particular source is. It is measured in degrees of the Kelvin scale (abbreviated to K), and the higher the number, the ‘cooler’ the light. The lower the ‘K’ number, the ‘warmer’ the light. |
| Ingress Protection rating (IP rating) | The IP (Ingress Protection) rating of a bulb or light fixture declares the level of protection it has against dirt and water. |
| Fidelity Index | The general colour fidelity index, Rf, represents how closely the colour appearances of the entire sample set are reproduced (rendered) on average by a test light as compared to those under a reference illuminant. |
| Gamut Index | The gamut area is defined as “the area enclosed by a set of test color samples illuminated by a light source, in a two-dimensional chromaticity diagram or a plane of color space.”1 Within a defined color space, a “gamut” describes the subset of colors that can be perceived under specific lighting conditions. |
| Binning | In the lighting industry, the act of "binning" of LEDs is the process of sorting LEDs by certain characteristics, such as color, voltage, and brightness. |
| Accent lighting | Accent lighting, also called highlighting, emphasizes objects by focusing light directly on them. Accent lighting is used inside and outside the home to feature locations such as an entrance or to create dramatic effects. |
| Dimmable driver | A dimming driver has two functions: As a driver, it converts the 230V AC mains input to a low voltage DC output. As a dimmer, it reduces the amount of electrical energy flowing to the LEDs, thereby causing them to dim. |
| Flicker | Flicker is the repeated and frequent variation in the output of a light source over time. |
| Fluorescent | A property of materials defined as the ability to emit light after absorbing electromagnetic radiation such as visible or UV light. |
| Candela | The candela is the unit of luminous intensity in the International System of Units. It measures the light output per unit solid angle emitted from a light source in a specific direction. |
| LUX | Lux is used to measure the amount of light output in a given area - one lux is equal to one lumen per square meter. It enables us to measure the total "amount" of visible light present and the intensity of the illumination on a surface. |
| Uniformity (U0) | The uniformity of lighting has significant effects on visual performance in both indoor and outdoor areas. Uniformity (represented as U0) value can be found by dividing the minimum brightness (Emin) resulting from calculations according to the current lighting order, to the average brightness value (Eavg). |
| Visible Light Spectrum | The visible light spectrum is the segment of the electromagnetic spectrum that the human eye can view. More simply, this range of wavelengths is called visible light. Typically, the human eye can detect wavelengths from 380 to 700 nanometers. |
| Ambient Temperature | Ambient Temperature is the temperature of the air surrounding an electrical enclosure. |
| Current-controlled dimming control | Current-controlled dimming controls LED brightness by varying the applied current using a 0-10V dimmer. Current-controlled dimming is smooth and HD-video friendly. It can only dim to a minimum of 5% of light output. |
| Design Light Consortium | It is a partnership of energy efficiency stakeholders in the United States and Canada to “promote quality, performance and energy efficient lighting solutions for the commercial sector”. |
| Pulse Width Modulation | Pulse-width modulation, or pulse-duration modulation, is a method of controlling the average power delivered by an electrical signal. |
| Surface Mounted Device | A surface mount device (SMD) is an electronic device whose components are mounted or placed directly on the surface of a printed circuit board. |
| Alternating Current | Alternating current is an electric current which periodically reverses direction and changes its magnitude continuously with time, in contrast to direct current, which flows only in one direction. |
| Direct Current | Direct current (DC) is an electric current that is uni-directional, so the flow of charge is always in the same direction. |
| Beam Angle | Beam angle (also called beam spread) is a measure of how light is distributed. On any plane perpendicular to the centerline of the light, the beam angle is the angle between two rays where the light intensity is 50% of the maximum light intensity. |
| LED Based Solar High Mast Lighting Systems | A Solar LED High Mast Light is a raised source of High illumination lights (6~8 lights) and with high intensity on the middle of major junctions (Ring roads, Outer Ring roads), turned on or lit automatically in the absence of light (at specified timings or at periodic times, every night). |
| Surface Mounted Diode (SMD) LEDs | A surface mount diode is a type that emits light and is flat mounted and soldered onto a circuit board. |
| Chip on Board (COB) LEDs | A COB LED is basically multiple LED chips (usually 9 or more) glued directly onto a substrate by the manufacturer to form a single module. |
| Dual In-Line Package (DIP) LEDs | A dual in-line package (DIP or DIL) is an electronic component package with a rectangular case and two parallel rows of electrical connector pins. |
| Graphene LED Lights | A graphene LED light bulb is simply an LED light bulb where the filament has been coated in graphene. A graphene LED bulb is reported to be 10% more efficient than regular LED light bulbs and they are cheaper to manufacture and buy. |
| LED Corn Bulbs | LED Corn lights are designed as an energy efficient alternative to high intensity discharge (HID) and SON lamps. It uses a large number of LEDs on a metal structure to provide sufficient light. This arrangement of LEDs looks a lot like a corn cob, hence the name "corn light". |
| Per Capita Income | Per capita income or total income measures the average income earned per person in a given area in a specified year. It is calculated by dividing the area's total income by its total population. Per capita income is national income divided by population size. |
| Charging Stations | A charging station, also known as a charging station or electric vehicle utility, is a power supply that provides electrical energy for charging plug-in electric vehicles. |
| Headlight | A headlight is a light that is mounted on the front of a car and illuminates the road in front of it. Low beam and high beam LED headlights are additional categories for these LED headlights. |
| Day Time Running Light (DRLs) | A daytime running lamp is a white, yellow, or amber lighting device mounted on the front of a road-going motor vehicle or bicycle. |
| Directional Signal Light | Directional signal lights are the front and rear lights on an automobile that flash to show the direction of a turn. |
| Stop Light | A red light that is mounted to the back of a car and turns on when the brakes are used to show that the car is stopped. |
| Reverse Light | The reverse light is at the back of the vehicle to indicate its backward motion. |
| Tail Light | A red light that can be seen in the dark is mounted on the rear of a road vehicle. Stop, reverse, and directional signal lights are all part of it. |
| Fog Light | Bright lights in automobiles used to increase visibility on the road in foggy conditions or to warn other drivers of the presence of the vehicle. |
| Passenger Vehicle | A passenger vehicle is a road vehicle, other than a moped or a motorcycle, intended for the transportation of people and designed for up to 8 to 9 seats. |
| Commercial Vehicle | A commercial vehicle (Bus, Truck, Van) is any type of motor vehicle used to transport goods or pay passengers. |
| Two Wheelers (2W) | A two-wheeler is a vehicle that runs on two wheels. |
| Streets & Roadways | Both roads and streets refer to hard, flat surfaces on the ground on which vehicles, people, and animals can travel. Since streetways are usually in cities and towns, they often have houses and buildings on both sides. The roadway is in the countryside and sometimes passes through forests and fields |
| Horticulture Lighting | Horticulture is the science and art of sustainably growing, producing, marketing and using high quality, intensively cultivated food and ornamental plants. |
Need More Details on Market Definition?
Ask a Question
Research Methodology
Mordor Intelligence has followed the following methodology in all our data center reports.
- Step 1: Raw Data Collection: To understand the market, initially, all crtical data points were identified. Critical information about countries and regions of interest including Per-capita Income, Population, Automotive Production, Interest rate on Auto-Loans, Number of Automobiles on Road, Total LED Import, Lighting Electricity Consumption among others were recorded or estimated based on internal calculations.
- Step 2: Identify Key Variables: To build a robust forecasting model, key variables such as Number of Households, Automotive Production, Road Networks among others were identified. Through an iterative process, the variables required for the market forecast were set, and the model was built using these variables.
- Step 3: Build a Market Model: Based on data and critical industry trend data (variables), including LED pricing, LED penetration rate, and project macro and micor economic factors were utilized for building the market forecasting.
- Step 4: Validate and Finalize: In this crucial step, all market numbers and variables derived through an internal mathematical model were validated through an extensive network of primary research experts from all the markets studied. The respondents are selected across levels and functions to generate a holistic picture of the market studied.
- Step 5: Research Outputs: Syndicated Reports, Custom Consulting Assignments, Databases & Subscription Platforms
Get More Details On Research Methodology
Download PDF
80% of our clients seek made-to-order reports. How do you want us to tailor yours?
