Metal Coatings Market Size
| Study Period | 2019 - 2029 |
| Base Year For Estimation | 2023 |
| CAGR | 5.00 % |
| Fastest Growing Market | Asia Pacific |
| Largest Market | Asia Pacific |
| Market Concentration | High |
Major Players
*Disclaimer: Major Players sorted in no particular order |
Metal Coatings Market Analysis
The metal coatings market is estimated at USD 12 billion currently and is expected to reach USD 15.5 billion over the forecast period, registering a CAGR of over 5% during the forecast period.
Due to the COVID-19 outbreak, nationwide lockdowns worldwide, disruption in manufacturing activities and supply chains, and production halts negatively impacted the market in 2020. However, the conditions started recovering in 2021, restoring the market's growth trajectory.
- The major factor driving the market studied is stringent VOC regulation driving the demand for waterborne DTM coatings.
- On the flip side, as the metal coatings are unsuitable for the harsh operating environment, they will likely hinder the market.
- Asia-Pacific dominated the global market with the largest consumption in countries such as China, India, etc.
Metal Coatings Market Trends
Water-borne Segment to Dominate the Market
- Water-borne paints and coatings account for most of the overall metal coatings market. The major reason for its gain over solvent-borne is its environment-friendly nature, as it is generally lower in volatile organic compounds (VOCs), which degrade the environment. Other properties, such as low odor, durability, and block resistance, make water-borne paints preferable.
- Water-borne coatings' increasing environment-friendly nature and versatile properties are increasing global demand.
- Water-borne coatings are majorly required in automotive paints. Hence, with the increase in global automotive production, the demand for water-borne coatings is also expected to increase.
- REACH, a European government initiative, was adopted to protect human health and the environment from the risks of chemicals while enhancing competition in the European chemical industry. Promoting alternative methods for the hazard assessment of substances reduces tests on animals. It is increasing the demand for coatings with low VOC content, such as water-borne coatings.
- Because of these factors, these are widely used in the automotive industry. As per data published by OICA, vehicle production grew significantly in the post-pandemic period.
- Electric vehicle production is also witnessing exponential growth. As per International Energy Agency (IEA), more than 10 million electric cars were sold worldwide in 2022, and sales are expected to grow by another 35% in 2023 to reach 14 million. Electric cars' share of the overall car market rose from around 4% in 2020 to 14% in 2022 and is set to increase further to 18% in 2023, based on IEA projections.
- Recently, there is a propensity to seek coatings with low odor, usability, and water clean-up characteristics among the end-users. Water-borne coatings meet these requirements and facilitate low viscosity without adding low-molecular-weight monomers.
Asia Pacific Region to Dominate the Market
- The Asia-Pacific region is expected to dominate the market for metal coatings consumption during the forecast period. The demand for metal coatings is increasing in countries like China, Japan, South Korea, and India. It is due to the presence of manufacturing bases in these countries.
- Metal Coating is also used in the electrical and electronics industry. The Asian region is the largest producer of electrical and electronics worldwide, with dominating countries such as China, Japan, South Korea, Singapore, and Malaysia.
- According to the China Association of Automobile Manufacturers (CAAM), China includes the largest automotive production base in the world, with a total vehicle production of 27 million units in 2022, registering an increase of 3.4 % compared to 26 million units produced in 2021. Further, China's electric vehicle (EV) industry is the largest globally, accounting for 64% of the global production of EVs. Sales of new EVs in China increased by 82% in 2022 compared to 2021. The country accounted for 59% of global EV sales in 2022, cementing its position as the world's largest electric vehicles market.
- In India, during FY 2022-23 (April 2022 to March 2023), according to the Society of Indian Automobile Manufacturers (SIAM), the country's automotive industry produced a total of 25,931,867 vehicles compared to 23,040,066 units from April 2021 to March 2022. Furthermore, electric vehicle sales in India are less than 1% of the total vehicle sales. However, it includes the potential to grow to more than 5% in a few years. There are more than 500 thousand electric two-wheelers and a few thousand electric cars on Indian roads. The industry volumes are fluctuating, mostly depending on the incentives offered by the government. Many players, such as Hero Eco, Ather, Electrotherm, Avon, Lohia, Ampere, etc., are continuing with the mission and trying to enforce positive change. Such factors are likely to increase the demand for the studied market.
Metal Coatings Industry Overview
The metal coatings market is partially consolidated. Some major players include AkzoNobel NV, Axalta Coating Systems, LLC, PPG Industries Inc., The Sherwin-Williams Company, and Henkel AG & Co. KGaA.
Metal Coatings Market Leaders
-
AkzoNobel NV
-
Axalta Coating Systems, LLC
-
PPG Industries Inc
-
The Sherwin-Williams Company
-
Henkel AG & Co. KGaA
*Disclaimer: Major Players sorted in no particular order
Metal Coatings Market News
- December 2022: The Sherwin-Williams Company acquired all the international operations of the ICA Group. The company offers water-based coatings for interiors and exteriors, among others.
- April 2022: Sherwin-Williams Company completed its acquisition of the European industrial coatings business of Sika AG. The acquired business became part of the Company's Performance Coatings Group operating segment. Sika's European industrial coating business manufactures and sells corrosion protection coating systems for high-value interior and exterior steel infrastructure, bridges, airport and rail, wind and energy, chemicals, power transmission, interior linings for oil and gas tanks, vessels, pipework, and water and wastewater applications, along with fire protection coating systems.
- February 2022: PPG Industries, Inc. completed the acquisition of Versflex, a manufacturer of polyurea, epoxy, and polyurethane coatings for water and wastewater infrastructure, flooring, transportation infrastructure, and industrial applications. Versaflex includes manufacturing locations in Kansas, Oklahoma, and Washington.
Metal Coatings Market Report - Table of Contents
1. INTRODUCTION
- 1.1 Study Assumptions
- 1.2 Scope of the Study
2. RESEARCH METHODOLOGY
3. EXECUTIVE SUMMARY
4. MARKET DYNAMICS
-
4.1 Drivers
- 4.1.1 Stringent VOC Regulation is Driving the Demand for Water-borne Direct-To-Metal Coatings
- 4.1.2 Other Drivers
-
4.2 Restraints
- 4.2.1 Not Suitable for Harsh Operating Environment
- 4.2.2 Other Restraints
- 4.3 Industry Value-Chain Analysis
-
4.4 Porter's Five Forces Analysis
- 4.4.1 Bargaining Power of Suppliers
- 4.4.2 Bargaining Power of Buyers
- 4.4.3 Threat of New Entrants
- 4.4.4 Threat of Substitute Products and Services
- 4.4.5 Degree of Competition
5. MARKET SEGMENTATION (Market Size in Value)
-
5.1 Resin Type
- 5.1.1 Epoxy
- 5.1.2 Polyester
- 5.1.3 Polyurethane
- 5.1.4 Other Resin Types
-
5.2 Technology
- 5.2.1 Water-borne
- 5.2.2 LED Curing
- 5.2.3 Solvent-borne
- 5.2.4 Powder
- 5.2.5 UV Cured
-
5.3 Application
- 5.3.1 Architectural
- 5.3.2 Automotive
- 5.3.3 Marine
- 5.3.4 Protective
- 5.3.5 General Industrial
- 5.3.6 Other Applications
-
5.4 Geography
- 5.4.1 Asia-Pacific
- 5.4.1.1 China
- 5.4.1.2 India
- 5.4.1.3 Japan
- 5.4.1.4 South Korea
- 5.4.1.5 Rest of Asia-Pacific
- 5.4.2 North America
- 5.4.2.1 United States
- 5.4.2.2 Canada
- 5.4.2.3 Mexico
- 5.4.3 Europe
- 5.4.3.1 Germany
- 5.4.3.2 United Kingdom
- 5.4.3.3 Italy
- 5.4.3.4 France
- 5.4.3.5 Rest of Europe
- 5.4.4 South America
- 5.4.4.1 Brazil
- 5.4.4.2 Argentina
- 5.4.4.3 Rest of South America
- 5.4.5 Middle East & Africa
- 5.4.5.1 Saudi Arabia
- 5.4.5.2 South Africa
- 5.4.5.3 Rest of Middle East & Africa
6. COMPETITIVE LANDSCAPE
- 6.1 Mergers & Acquisitions, Joint Ventures, Collaborations, and Agreements
- 6.2 Market Share/Ranking Analysis**
- 6.3 Strategies Adopted by Leading Players
-
6.4 Company Profiles
- 6.4.1 AkzoNobel NV
- 6.4.2 Axalta Coating Systems, LLC
- 6.4.3 BASF SE
- 6.4.4 Clean Diesel Technologies Inc.
- 6.4.5 Hempel A/S
- 6.4.6 Henkel AG & Co. KGaA
- 6.4.7 Jotun
- 6.4.8 Kansai Paint Co. Ltd
- 6.4.9 Nippon Paint Holdings Co. Ltd
- 6.4.10 PPG Industries, Inc.
- 6.4.11 RPM International
- 6.4.12 The Sherwin-Williams Company
- *List Not Exhaustive
7. MARKET OPPORTUNITIES AND FUTURE TRENDS
** Subject To AvailablityMetal Coatings Industry Segmentation
Metal coatings are chemicals used for metallic surfaces for functional properties such as anti-corrosion, anti-slip surface, anti-bacterial, etc. The metal coatings market is segmented by resin type, technology, application, and geography. The market is segmented by resin type into epoxy, polyester, polyurethane, and other resin types. The market is segmented by technology into water-borne, LED curing, solvent-borne, powder, and UV cured. The market is segmented by application into architectural, automotive, marine, protective, general industrial, and other applications. The report also covers the market size and forecasts for the UV curable adhesives market in 17 countries across major regions. The report offers market size and forecasts for the calcium oxide market in revenue (USD million) for all the above segments.
| Resin Type | Epoxy | |
| Polyester | ||
| Polyurethane | ||
| Other Resin Types | ||
| Technology | Water-borne | |
| LED Curing | ||
| Solvent-borne | ||
| Powder | ||
| UV Cured | ||
| Application | Architectural | |
| Automotive | ||
| Marine | ||
| Protective | ||
| General Industrial | ||
| Other Applications | ||
| Geography | Asia-Pacific | China |
| India | ||
| Japan | ||
| South Korea | ||
| Rest of Asia-Pacific | ||
| Geography | North America | United States |
| Canada | ||
| Mexico | ||
| Geography | Europe | Germany |
| United Kingdom | ||
| Italy | ||
| France | ||
| Rest of Europe | ||
| Geography | South America | Brazil |
| Argentina | ||
| Rest of South America | ||
| Geography | Middle East & Africa | Saudi Arabia |
| South Africa | ||
| Rest of Middle East & Africa |
Metal Coatings Market Research FAQs
What is the current Metal Coatings Market size?
The Metal Coatings Market is projected to register a CAGR of greater than 5% during the forecast period (2024-2029)
Who are the key players in Metal Coatings Market?
AkzoNobel NV, Axalta Coating Systems, LLC, PPG Industries Inc, The Sherwin-Williams Company and Henkel AG & Co. KGaA are the major companies operating in the Metal Coatings Market.
Which is the fastest growing region in Metal Coatings Market?
Asia Pacific is estimated to grow at the highest CAGR over the forecast period (2024-2029).
Which region has the biggest share in Metal Coatings Market?
In 2024, the Asia Pacific accounts for the largest market share in Metal Coatings Market.
What years does this Metal Coatings Market cover?
The report covers the Metal Coatings Market historical market size for years: 2019, 2020, 2021, 2022 and 2023. The report also forecasts the Metal Coatings Market size for years: 2024, 2025, 2026, 2027, 2028 and 2029.
Metal Coatings Industry Report
Statistics for the 2024 Metal Coatings market share, size and revenue growth rate, created by Mordor Intelligence™ Industry Reports. Metal Coatings analysis includes a market forecast outlook to 2029 and historical overview. Get a sample of this industry analysis as a free report PDF download.
