Protective Coatings Market Size
| Study Period | 2019 - 2029 |
| Market Size (2024) | USD 13.51 Billion |
| Market Size (2029) | USD 15.96 Billion |
| CAGR (2024 - 2029) | 3.40 % |
| Fastest Growing Market | Asia-Pacific |
| Largest Market | Asia-Pacific |
Major Players
*Disclaimer: Major Players sorted in no particular order |
Protective Coatings Market Analysis
The Protective Coatings Market size is estimated at USD 13.51 billion in 2024, and is expected to reach USD 15.96 billion by 2029, growing at a CAGR of 3.40% during the forecast period (2024-2029).
The COVID-19 pandemic negatively impacted the market in 2020. However, as the lockdowns were lifted, these end-user sectors started to grow rapidly to reach the pre-COVID level, which is expected to enhance demand for the market studied through the years to come.
- Over the short term, growing infrastructure and industrialization in the Asia-Pacific region and increasing green coatings demand will likely drive the market's growth.
- On the flip side, regulations related to VOC emissions are expected to hinder the growth of the protective coatings market.
- Potential replacement by powder coatings is likely to act as an opportunity for the market beyond the forecast period.
- The Asia-Pacific is expected to dominate the market due to high consumption in countries such as China and India.
Protective Coatings Market Trends
This section covers the major market trends shaping the Protective Coatings Market according to our research experts:
Increasing Demand from the Infrastructure Sector
- The infrastructure industry is the key consumer for the protective coatings market. Surface deterioration of a structure is a major problem in the infrastructure industry. Surface deterioration may lead to structural problems due to the loss of cover and corrosion of surface reinforcements. To minimize the deterioration, protective coatings are used. The coating material should be durable, bond well to the surface of the substrate, and be compatible if there is an expansion or a contraction during temperature changes.
- A 100% solid/rigid structural polyurethane coating is likely the technology of choice for infrastructure protection in harsh environments. 100% solid/rigid structural polyurethane coating is also an anti-corrosive coating for virtually any type of steel structure.
- Countries such as India, Germany, the United States, and China, among others, are witnessing increasing projects and investments in the infrastructure sector. Hence, witnessing the consumption of protective coatings.
- In India, one of the crucial components that drive and sustain economic growth is infrastructure, as it is critical to improve and maintain the country's manufacturing competitiveness leading to higher growth.
- Key challenges in India's infrastructure sector are land acquisition policies, implementation delays, and the risk of project overruns caused by bureaucratic delays. However, the current government ensures minimizing such delays, reducing complexities, and improving project transparency to increase the pace of infrastructure projects.
- The government launched the National Infrastructure Pipeline (NIP) for FY 2019-25, an INR 111-lakh-crore (~USD 1.5 trillion) group of infrastructure projects aimed at improving the ease of living and business environment.
- Initially, it was earmarked for 6,835 projects and expanded to 7,400 projects in 2021. Roads, housing, urban development, railways, conventional power, renewable energy, and irrigation account for most of the project value.
- Currently, North America has started significant projects in the first quarter of 2022; the projects include the USD 8,560 million Ontario Line Subway project, the USD 3,000 Million Steel Mini Mill project, the USD 3,000 million Osceola Steel Plant project, and other projects.
- In August 2022, Saudi Arabia also started constructing the Jeddah Central development project. The USD 20 billion infrastructure project involves the construction of four landmarks, including a museum, a sports stadium, a coral farm, and an opera house. Moreover, at least 17,000 houses for citizens and over 3,000 hotels and tourism sites are also to be built.
- Based on the aspects above, the infrastructure segment is expected to dominate the market.
Asia-Pacific to Dominate the Market
- The Asia-Pacific region dominated the global market. China is estimated to hold the largest market share globally.
- China has the largest construction market in the world, encompassing 20% of all construction investments globally. In China, the construction industry grew rapidly in 2020, but the growth was restricted due to the pandemic. The construction sector supported the economic growth in the country whenever major slowdowns occurred.
- The Chinese infrastructure sector is estimated to hold the largest share in the country of the market studied. The country has the largest construction market in the world, encompassing 20% of all construction investments globally.
- China is a hub for chemical processing, accounting for a major chunk of chemicals produced globally. With the rising demand for various chemicals globally, this sector's demand for protective coating is projected to increase during the forecast period.
- In China, several projects commenced construction in the fourth quarter of 2021, including the USD 7.2 billion Wuhan Chow Tai Fook Financial Center in Wuhan, Hubei, the USD 4.2 billion 2,000MW Qingdao Shenyuanhai Offshore Wind Farm and the CNY 18.1 billion (~USD 2.8 billion) Liuheng Sea-Crossing Bridge project.
- Furthermore, the infrastructure sector in India is an important pillar of the country's economy. The government is taking various initiatives to ensure the timely creation of excellent infrastructure.
- In India, The National Infrastructure Pipeline (NIP), which was launched with 6,835 projects, has been expanded to 9,335 projects with total envisaged investments of almost 108 trillion between FY20 and FY25.
- India produces about 95 minerals, including ten metallic minerals, three atomic minerals, four fuel-related minerals, 23 non-metallic minerals, and 55 minor minerals. This makes India one of the major mining countries in the Asia-Pacific region. Many private players are investing actively to boost the mining sector.
- All the aforementioned factors make the Asia-Pacific region dominant in the global market.
Protective Coatings Industry Overview
The global protective coatings market is fragmented in nature, and the top five players dominated global production with a significant share in 2021. Some of the key players (not in any particular order) in the market include Akzo Nobel NV, The Sherwin-Williams Company, PPG Industries Inc., Jotun, and Hempel AS, among others.
Protective Coatings Market Leaders
-
The Sherwin Williams Company
-
Akzo Nobel N.V.
-
Hempel A/S
-
Jotun
-
PPG Industries Inc.
*Disclaimer: Major Players sorted in no particular order
Protective Coatings Market News
- September 2022: Hempel launched a new protective coating Hempablade Edge 171, for leading-edge protection (LEP) on wind turbine rotor blades. The product has the highest rain erosion performance data for a liquid LEP, and some of the lowest dry film thicknesses provide long-term protection against rain erosion and reduce time and costs during application.
- August 2022: Kansai Paint acquired Westdeutsche Farben GmbH, a German coatings manufacturer with technological expertise in water-based coatings strengthening its international business operations.
- May 2022: Jotun Group and Med Investment Holding SpA completed a collaboration agreement to produce paints and protective coatings through a joint venture with Technover P. in a newly built and well-equipped factory in the district of Tizi-Ouzou, east of Algiers, with a capacity for producing locally USD 120 million of the standard quality of paint and coating that are presently imported.
Protective Coatings Market Report - Table of Contents
1. INTRODUCTION
- 1.1 Study Assumptions
- 1.2 Scope of the Study
2. RESEARCH METHODOLOGY
3. EXECUTIVE SUMMARY
4. MARKET DYNAMICS
-
4.1 Drivers
- 4.1.1 Growing Infrastructure and Industrialization in the Asia-Pacific Region
- 4.1.2 Growing Green Coatings Demand
-
4.2 Restraints
- 4.2.1 Regulations Related to VOC Emissions
- 4.3 Industry Value Chain Analysis
-
4.4 Porter's Five Forces Analysis
- 4.4.1 Bargaining Power of Suppliers
- 4.4.2 Bargaining Power of Buyers
- 4.4.3 Threat of New Entrants
- 4.4.4 Threat of Substitute Products and Services
- 4.4.5 Degree of Competition
5. MARKET SEGMENTATION (Market Size in Value)
-
5.1 By Product Type
- 5.1.1 Epoxy
- 5.1.2 Polyurethane
- 5.1.3 Vinyl Ester
- 5.1.4 Polyester
- 5.1.5 Other Product Types
-
5.2 By Technology
- 5.2.1 Water-borne
- 5.2.2 Solvent-borne
- 5.2.3 Powder
- 5.2.4 Other Technologies
-
5.3 By End-user Industry
- 5.3.1 Oil and Gas
- 5.3.2 Mining
- 5.3.3 Power
- 5.3.4 Infrastructure
- 5.3.5 Other End-user Industries
-
5.4 By Geography
- 5.4.1 Asia-Pacific
- 5.4.1.1 China
- 5.4.1.2 India
- 5.4.1.3 Japan
- 5.4.1.4 South Korea
- 5.4.1.5 Rest of Asia-Pacific
- 5.4.2 North America
- 5.4.2.1 United States
- 5.4.2.2 Canada
- 5.4.2.3 Mexico
- 5.4.3 Europe
- 5.4.3.1 Germany
- 5.4.3.2 United Kingdom
- 5.4.3.3 Italy
- 5.4.3.4 France
- 5.4.3.5 Rest of Europe
- 5.4.4 South America
- 5.4.4.1 Brazil
- 5.4.4.2 Argentina
- 5.4.4.3 Rest of South America
- 5.4.5 Middle East and Africa
- 5.4.5.1 Saudi Arabia
- 5.4.5.2 South Africa
- 5.4.5.3 Rest of Middle East and Africa
6. COMPETITIVE LANDSCAPE
- 6.1 Mergers, Acquisitions, Joint Ventures, Collaborations, and Agreements
- 6.2 Market Share Analysis
- 6.3 Strategies Adopted by the Leading Players
-
6.4 Company Profiles
- 6.4.1 Akzo Nobel NV
- 6.4.2 Axalta Coating Systems LLC
- 6.4.3 Hempel AS
- 6.4.4 Jotun A/S
- 6.4.5 Kansai Paint Co. Ltd
- 6.4.6 Nippon Paints
- 6.4.7 PPG Industries Inc.
- 6.4.8 RPM International
- 6.4.9 The Sherwin Williams Company
- 6.4.10 Asian Paints PPG Pvt. Limited
- 6.4.11 Sika AG
- *List Not Exhaustive
7. MARKET OPPORTUNITIES AND FUTURE TRENDS
- 7.1 Potential Replacement by Powder Coatings
Protective Coatings Industry Segmentation
A protective coating is a layer of material applied to the surface of another material with the intent of inhibiting or preventing corrosion. The protective coatings market is segmented by product type, technology, end-user industry, and geography. By product type, the market is segmented into epoxy, polyurethane, vinyl ester, polyester, and other product types. By technology, the market is segmented into water-borne, solvent-borne, powder, and other technologies. By end-user industry, the market is segmented into oil and gas, mining, power, infrastructure, and other end-user industries.
The report also covers the size and forecasts for the protective coatings market in 15 countries across major regions. For each segment, the market sizing and forecasts have been done based on revenue (USD million).
| By Product Type | Epoxy | |
| Polyurethane | ||
| Vinyl Ester | ||
| Polyester | ||
| Other Product Types | ||
| By Technology | Water-borne | |
| Solvent-borne | ||
| Powder | ||
| Other Technologies | ||
| By End-user Industry | Oil and Gas | |
| Mining | ||
| Power | ||
| Infrastructure | ||
| Other End-user Industries | ||
| By Geography | Asia-Pacific | China |
| India | ||
| Japan | ||
| South Korea | ||
| Rest of Asia-Pacific | ||
| By Geography | North America | United States |
| Canada | ||
| Mexico | ||
| By Geography | Europe | Germany |
| United Kingdom | ||
| Italy | ||
| France | ||
| Rest of Europe | ||
| By Geography | South America | Brazil |
| Argentina | ||
| Rest of South America | ||
| By Geography | Middle East and Africa | Saudi Arabia |
| South Africa | ||
| Rest of Middle East and Africa |
Protective Coatings Market Research FAQs
How big is the Protective Coatings Market?
The Protective Coatings Market size is expected to reach USD 13.51 billion in 2024 and grow at a CAGR of 3.40% to reach USD 15.96 billion by 2029.
What is the current Protective Coatings Market size?
In 2024, the Protective Coatings Market size is expected to reach USD 13.51 billion.
Who are the key players in Protective Coatings Market?
The Sherwin Williams Company, Akzo Nobel N.V., Hempel A/S, Jotun and PPG Industries Inc. are the major companies operating in the Protective Coatings Market.
Which is the fastest growing region in Protective Coatings Market?
Asia-Pacific is estimated to grow at the highest CAGR over the forecast period (2024-2029).
Which region has the biggest share in Protective Coatings Market?
In 2024, the Asia-Pacific accounts for the largest market share in Protective Coatings Market.
What years does this Protective Coatings Market cover, and what was the market size in 2023?
In 2023, the Protective Coatings Market size was estimated at USD 13.07 billion. The report covers the Protective Coatings Market historical market size for years: 2019, 2020, 2021, 2022 and 2023. The report also forecasts the Protective Coatings Market size for years: 2024, 2025, 2026, 2027, 2028 and 2029.
Protective Coatings Industry Report
Statistics for the 2024 Protective Coatings market share, size and revenue growth rate, created by Mordor Intelligenceā¢ Industry Reports. Protective Coatings analysis includes a market forecast outlook to 2029 and historical overview. Get a sample of this industry analysis as a free report PDF download.
