Talc Market Size
| Study Period | 2019-2029 |
| Base Year For Estimation | 2023 |
| CAGR (2024 - 2029) | 4.50 % |
| Fastest Growing Market | Asia-Pacific |
| Largest Market | Asia-Pacific |
| Market Concentration | Medium |
Major Players
*Disclaimer: Major Players sorted in no particular order |
Talc Market Analysis
The Talc Market size is estimated at 7.66 Million tons in 2024, and is expected to reach 10.09 Million tons by 2029, growing at a CAGR of 4.5% during the forecast period (2024-2029).
The COVID-19 pandemic affected the market in the past years on a global scale and forced ceramic makers, pulp and paper manufacturers, and paints and coatings manufacturers to shut down their operations, lowering the demand for talc in 2022. However, the condition is expected to recover, which will restore the growth trajectory of the market studied during the latter half of the forecast period.
- Over the short term, increasing demand for industrial and marine coatings is driving the demand for talc, as it provides benefits such as corrosion protection, solvent reduction, and good adhesion.
- On the flip side, health issues pertaining to talc-based cosmetic products are expected to hamper the market's growth.
- The growing demand for thermoplastics in the aerospace industry is likely to act as an opportunity in the future.
- Asia-Pacific dominated the talc market globally, owing to the rising plastics market in China and the presence of white talc reserves in countries like India.
Talc Market Trends
Plastic and Rubber Industry to Dominate the Market
- Talc imparts a variety of benefits to polypropylene, such as higher stiffness and improved dimensional stability.
- It is mainly used as a filler in plastics and acts as an absorbent and anti-caking agent during production. The plate shape of talc particles increases the hardness of products such as polyethylene, polypropylene, nylon, vinyl, and polyester. It also increases heat resistance and reduces shrinkage.
- Talc is the most commonly used additive, modifier, or filler in a variety of industries, including chemicals, plastics, and rubber. It can significantly improve the tensile strength of plastic products, impact properties, heat resistance, creep resistance, tear resistance, etc.
- According to Plastics Europe, about two-thirds of Europe’s plastics demand is concentrated in five countries, including 25.4% in Germany, 14.3% in Italy, 9.7% in France, 7.6% in the United Kingdom, and 7.5% in Spain, according to Plastics Europe.
- The major companies operating in the European plastic market are more inclined towards strategic business development to expand their geographical presence. For instance, in June 2022, Linde Engineering was selected by Slovnaft – a member company of MOL Group, to conduct a revamp of a polypropylene plant in Slovakia. This revamped the plant capacity of polypropylene per year by 18% to around 300 kilotons, and the storage facility expanded from 45 to 61 silos.
- In December 2022, Exxon Mobil Corporation started a new manufacturing facility for polypropylene in Baton Rouge, the capital of Louisiana. This plant can produce 450,000 MT/year of polypropylene. Further, Formosa Plastics Corporation, in the United States, is constructing a new manufacturing facility for polypropylene in Point Comfort, Texas in the United States. Upon completion in 2024, this plant will produce 100,000 tonnes of Alpha olefins to manufacture high-density polyethylene (HDPE). 63,000 tonnes of Alpha olefins would be used by the company while the remaining 37,000 tonnes would be sold internationally.
- The usage of plastic in Indonesia is increasing since the e-commerce industry requires packaging. FMCG companies, including Wilmar Group, Mayora, and Indofood, have established integrated packaging production units in Indonesia. Exxon Mobil is also investing in the Indonesian plastic industry. It signed a memorandum of understanding with PT Indomobil Prima Energi (IPE), in November 2022, regarding the application of advanced plastic recycling technology on a large scale in Indonesia.
- Hence, such expansion projects carried out by various companies in the industry are likely to drive the market growth during the forecast period.
Asia-Pacific Region to Dominate the Market
- The Asia-Pacific region dominated the global market share with the growing demand from the countries such as China, India, and Japan.
- China is one of the major consumers of talc in the Asia-Pacific region. The country uses talc in a wide range of industries, such as ceramics, food and beverage, pulp and paper, and others. According to the data from the Ministry of Industry and Information Technology, the country witnessed increase in its beverage production by 6 percent year-on-year, reaching 44.35 million tons during Q1 2023.
- Also, China is the leading producer and consumer of ceramics worldwide. It is one of the largest producers of ceramic tiles in the world and has produced around 8.47 billion square meters of ceramic tiles. The fierce competition in the domestic and export markets forces ceramic producers to improve their production process and product quality in the region.
- India is one of the few countries with white talc reserves. The deposits of talc are found throughout the country. Most of the white talc produced is consumed in the country itself.
- In India, most of the commercial production of talc comes from Rajasthan. The two leading talc producers in the country (Golcha Group and Golcha Associated) are based in Jaipur, Rajasthan, catering cosmetics and polymer industry with talc of superior grades.
- The Indian plastic industry market is one of the country's most important economic sectors. According to the India Brand Equity Foundation, the total value of plastics exported between April and September 2022 was USD 6.38 billion.
- Furthermore, China has a huge plastics market that requires a high supply of talc to function. In China, talc is found in 15 provinces, with Liaoning, Shandong, Guangxi, Jiangxi, and Qinghai as the prominent areas that account for more than 90% of the total reserves.
- All these factors, in turn, are expected to drive the demand for talc in the region during the forecast period.
Talc Industry Overview
The talc market is moderately consolidated in nature, with several companies operating on both global and regional levels. Some of the major players in the market (not in any particular order) include ELEMENTIS PLC, Imerys, IMI Fabi SpA, Nippon Talc Co. Ltd, and Minerals Technologies Inc.
Talc Market Leaders
-
Mineral Technologies Inc.
-
IMI Fabi SpA
-
Imerys
-
Nippon Talc Co., Ltd.
-
ELEMENTIS PLC
*Disclaimer: Major Players sorted in no particular order
Talc Market News
- Sept 2022: Imerys entered into exclusive negotiations with Syntagma Capital to sell the majority of its assets producing kaolin, grinding calcium carbonate ("GCC"), precipitated calcium carbonate ("PCC"), and talc, which principally serve the paper markets, for an enterprise value of EUR 390 million, including an earn-out based on future business performance.
- Apr 2022: Imerys and Safic-Alcan extend their distribution partnership. This new agreement has expanded their distribution partnership to include the Turkish market. It covers the distribution of all mineral fillers, including Kaolin, Talc, Carbonates, PCC, Mica, Diatomite, Perlite, and Wollastonite. It also covers the distribution of the rubber and plastics markets.
Talc Market Report - Table of Contents
1. INTRODUCTION
- 1.1 Study Assumptions
- 1.2 Scope of the Study
2. RESEARCH METHODOLOGY
3. EXECUTIVE SUMMARY
4. MARKET DYNAMICS
-
4.1 Drivers
- 4.1.1 Increasing Demand for Plastics
- 4.1.2 Increasing Demand for Industrial and Marine Coatings
-
4.2 Restraints
- 4.2.1 Health Issues in Cosmetic Products
- 4.3 Industry Value Chain Analysis
-
4.4 Porter's Five Forces Analysis
- 4.4.1 Bargaining Power of Suppliers
- 4.4.2 Bargaining Power of Consumers
- 4.4.3 Threat of New Entrants
- 4.4.4 Threat of Substitute Products and Services
- 4.4.5 Degree of Competition
5. MARKET SEGMENTATION (Market Size in Volume)
-
5.1 Deposit
- 5.1.1 Talc Chlorite
- 5.1.2 Talc Carbonate
-
5.2 End-user Industry
- 5.2.1 Ceramic
- 5.2.2 Food and Beverage
- 5.2.3 Paints and Coatings
- 5.2.4 Personal Care
- 5.2.5 Plastics and Rubber
- 5.2.6 Pulp and Paper
- 5.2.7 Other End-user Industries
-
5.3 Geography
- 5.3.1 Asia-Pacific
- 5.3.1.1 China
- 5.3.1.2 India
- 5.3.1.3 Japan
- 5.3.1.4 South Korea
- 5.3.1.5 Rest of Asia-Pacific
- 5.3.2 North America
- 5.3.2.1 United States
- 5.3.2.2 Canada
- 5.3.2.3 Mexico
- 5.3.3 Europe
- 5.3.3.1 Germany
- 5.3.3.2 United Kingdom
- 5.3.3.3 France
- 5.3.3.4 Italy
- 5.3.3.5 Spain
- 5.3.3.6 Rest of Europe
- 5.3.4 South America
- 5.3.4.1 Brazil
- 5.3.4.2 Argentina
- 5.3.4.3 Rest of South America
- 5.3.5 Middle-East and Africa
- 5.3.5.1 Saudi Arabia
- 5.3.5.2 South Africa
- 5.3.5.3 Rest of Middle-East and Africa
6. COMPETITIVE LANDSCAPE
- 6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
- 6.2 Market Share(%)**/Ranking Analysis
- 6.3 Strategies Adopted by Leading Players
-
6.4 Company Profiles
- 6.4.1 AKJ MinChem
- 6.4.2 ANAND TALC
- 6.4.3 Chanda Minerals
- 6.4.4 ELEMENTIS PLC
- 6.4.5 Eurominerals Gmbh
- 6.4.6 Golcha Group
- 6.4.7 Imerys
- 6.4.8 IMI Fabi SpA
- 6.4.9 LITHOS Industrial Minerals GmbH
- 6.4.10 Magris Performance Materials
- 6.4.11 Minerals Technologies Inc.
- 6.4.12 Nippon Talc Co. Ltd
- *List Not Exhaustive
7. MARKET OPPORTUNITIES AND FUTURE TRENDS
- 7.1 Growing Demand for Thermoplastics in the Aerospace Industry
Talc Market Segmentation
Talc is a naturally occurring mineral mined from the earth and made up of magnesium, silicon, oxygen, and hydrogen. It is a hydrous magnesium silicate used in many industries, including plastics, rubber, paints, paper, and pharmaceuticals.
The Talc Market is segmented by Deposit (Talc Chlorite and Talc Carbonate), End-user Industry (Ceramic, Food and Beverage, Paints and Coatings, Personal Care, Plastics and Rubber, Pulp, and Paper, and Other End-user Industries), and Geography (Asia-Pacific, North America, Europe, South America, and Middle-East and Africa). The report offers market size and forecasts for the talc market in volume (tons) for all the above segments.
| Deposit | Talc Chlorite | |
| Talc Carbonate | ||
| End-user Industry | Ceramic | |
| Food and Beverage | ||
| Paints and Coatings | ||
| Personal Care | ||
| Plastics and Rubber | ||
| Pulp and Paper | ||
| Other End-user Industries | ||
| Geography | Asia-Pacific | China |
| India | ||
| Japan | ||
| South Korea | ||
| Rest of Asia-Pacific | ||
| Geography | North America | United States |
| Canada | ||
| Mexico | ||
| Geography | Europe | Germany |
| United Kingdom | ||
| France | ||
| Italy | ||
| Spain | ||
| Rest of Europe | ||
| Geography | South America | Brazil |
| Argentina | ||
| Rest of South America | ||
| Geography | Middle-East and Africa | Saudi Arabia |
| South Africa | ||
| Rest of Middle-East and Africa |
Talc Market Research FAQs
How big is the Talc Market?
The Talc Market size is expected to reach 7.66 million tons in 2024 and grow at a CAGR of 4.5% to reach 10.09 million tons by 2029.
What is the current Talc Market size?
In 2024, the Talc Market size is expected to reach 7.66 million tons.
Who are the key players in Talc Market?
Mineral Technologies Inc., IMI Fabi SpA, Imerys, Nippon Talc Co., Ltd. and ELEMENTIS PLC are the major companies operating in the Talc Market.
Which is the fastest growing region in Talc Market?
Asia-Pacific is estimated to grow at the highest CAGR over the forecast period (2024-2029).
Which region has the biggest share in Talc Market?
In 2024, the Asia-Pacific accounts for the largest market share in Talc Market.
Talc Industry Report
The talc market report provides a comprehensive industry analysis, covering various segments such as deposit types, end-user industries, and geographic regions. This industry report offers insights into the market size, market growth, and market trends, providing valuable market data for stakeholders. The report highlights the market segmentation, detailing the market value and market share across different sectors. It includes a market forecast, offering an industry outlook that predicts future market dynamics.
The global market for talc is thoroughly examined, with a market overview that sheds light on the current state of the industry. The report includes industry statistics and industry size, giving a clear picture of the market's scope. Additionally, the report covers industry sales and industry trends, providing a detailed market review. Market predictions are made based on extensive industry research, ensuring the report's reliability.
The report also features industry information on market leaders, helping identify key players in the talc market. It includes a report example and a report PDF for those interested in a more detailed analysis. The industry reports and research companies involved in the study provide a solid foundation for understanding the market dynamics.
Overall, this talc market report is an essential tool for anyone looking to understand the market outlook and industry trends, offering a thorough market segmentation and market forecast to guide strategic decisions.
