US Automotive LED Lighting Market Size
|
Study Period | 2017 - 2030 |
|
Market Size (2024) | USD 1.71 Billion |
|
|
Market Size (2030) | USD 2.26 Billion |
|
Largest Share by Automotive Utility Lighting | Headlights |
|
|
CAGR (2024 - 2030) | 4.75 % |
|
|
Fastest Growing by Automotive Utility Lighting | Tail Light |
Major Players |
||
|
||
|
*Disclaimer: Major Players sorted in no particular order |
US Automotive LED Lighting Market Analysis
The US Automotive LED Lighting Market size is estimated at 1.71 billion USD in 2024, and is expected to reach 2.26 billion USD by 2030, growing at a CAGR of 4.75% during the forecast period (2024-2030).
1.71 Billion
Market Size in 2024 (USD)
2.26 Billion
Market Size in 2030 (USD)
-2.86 %
CAGR (2017-2023)
4.75 %
CAGR (2024-2030)
Largest Segment by Automotive Utility Lighting
35.10 %
value share, Headlights, 2023
In United States, Motor vehicle production is high for passenger car category in 2021 accounts for 1.7 million units in 2022.
Largest Segment by Automotive Vehicle Lighting
95.80 %
value share, Passenger Cars, 2023
The passenger car market is expected to come from the electric vehicles. In 2022, 5.7% of US car sales were fully electric car sales which is up from 3.2% in 2021, 1.7% in 2020, and 1.4% in 2019.
Fastest-growing Segment by Automotive Utility Lighting
4.76 %
Projected CAGR, Tail Light, 2024-2030
The supportive governmnet policies drives the demand of Tail lights. As per the 49 CFR Section 571.108, every motor vehicle shall be equipped with at least two tail lamps.
Fastest-growing Segment by Automotive Vehicle Lighting
6.90 %
Projected CAGR, 2 Wheelers, 2024-2030
The total sales of LEDs in this category is expected to reach USD 17.9 million by 2023. Growing demand for street bikes and electric 2-Wheeler market drives the market growth.
Leading Market Player
19.06 %
market share, OSRAM GmbH., 2022
In 2022, it introduced a new, hyper-efficient automotive LEDs for front lighting system, the OSLON Black Flat X series and also, it is focusing on implementing projection lighting systems in new passenger car designs.
Growing demand for EVs and increasing number of accidents drive the market's growth
- In 2020, automotive LED production decreased because of the COVID-19 pandemic, leading to an automotive semiconductor shortage. The supply chain was also being impacted by difficulties in gaining access to key materials because of the China-US trade war.
- In terms of value share, in 2023, others accounted for the majority of the share, followed by headlights (35.1%), directional signal lights (DSL) (12.7%), stoplights, and daytime running lights (DRL). The market share is expected to remain the same for all lighting during the study period, with a small reduction in others. With the rising accident trend, the penetration rate of fog LED lamps is anticipated to rise. In the United States, the number of motor vehicle deaths reached an estimated 46,000 in 2022. Compared to the pre-pandemic death rate, it increased by nearly 22%.
- In terms of volume share, in 2023, DSL accounted for the majority of the share (26.2%), followed by headlights (17.4%), others, and stoplights. The market share is expected to remain the same for all the lights during the forecast period, with a small reduction in DSLs.
- In terms of expansion and innovations, the United States is one of the significant auto-producing nations in the world. In 2022, the auto industry in the United States produced approximately 10.06 million motor vehicles. It includes passenger cars, light commercial vehicles, heavy trucks, buses and coaches. The key automotive manufacturers in the market are focusing on expanding electric vehicles. The Charging and Fueling Infrastructure Grant Program would grant USD 2.5 billion over five years. Thus, the growth in NEVs (neighborhood electric vehicles) would increase the penetration of automotive LEDs in the market.
Understand The Key Trends Shaping This Market
Download PDF
US Automotive LED Lighting Market Trends
Upgradation of automobiles and more EV are seen on road, indicating more use of LED lights
- The total automobile vehicle production in South America was expected to reach 9.83 million units in 2023. The COVID-19 pandemic significantly impacted almost every nation and sector of the global economy. The automotive industry was particularly exposed and badly affected, with a 15% decline in US vehicle sales from 2019 to 2020. In 2020, the total production in April was the lowest monthly production level, according to the Alliance for Automobile Innovation, which calculated that 93 percent of all automobile production in the United States was temporarily halted by late March. Thus, the low production negatively affected the demand for LED chips required to produce LED lights in the automotive industry.
- The top American automakers include BMW, Ford, General Motors, Honda, Hyundai, KIA, Tesla, Nissan, Mercedes-Benz, Toyota, Volkswagen, Volvo, and many more. These producers upgrade their automobiles constantly. Recently, in April 2023, Volvo renovated the inside of the Volvo EX90 using LED lighting. An entire system of 72 SunLike LEDs was installed inside the car to provide a near-sunlight sensation. Such technical advancement fuels the need to expand LED in the automobile sector.
- The market for electric cars (EVs) has expanded quickly and is anticipated to do so throughout the next ten years. From just 0.2 percent of all car sales in 2011 to 4.6 percent in 2021, electric car sales in the US grew. Over the decade of 2011–21, the number of EVs on the road increased significantly, from around 22,000 to over 2 million. As a result, the need for semiconductor chips used in various EV applications rises along with the popularity of EVs, raising the need for LED illumination.
Understand The Key Trends Shaping This Market
Download PDF
Government investments in EV manufacturing by providing tax benefits and funding of EV charging stations to drive the LED market
- The United States is turning electric. Electric vehicles are transitioning from an outliner in the automotive industry to the wave of the future, with sales increasing by 65% in 2022. To expand further, the government issued a trillion-dollar infrastructure bill in 2021 that allocates USD 7.5 billion toward building 500,000 more public EV chargers by 2030 and also made investments in EV manufacturing by providing tax benefits of USD 7,500 for purchasing an EV assembled in the US. Also, Tesla, one of the significant players in EVs, committed to delivering around 3,500 of its US Supercharger stations and 4,000 Level 2 charging docks available to all brands of electric vehicles by the end of 2024.
- In March 2023, the Biden-Harris Administration announced the availability of applications for a new multibillion-dollar program to fund electric vehicle (EV) charging and alternative-fuel infrastructure in towns around the country and along designated roads, interstates, and major routes. The Bipartisan Infrastructure Act established the US Department of Transportation's new Charging and Fueling Infrastructure (CFI) Discretionary Grant Programme, which would grant USD 2.5 billion over five years to a wide range of applicants, including cities, counties, local governments, and Tribes.
- By 2030, Georgia, Kentucky, and Michigan are expected to dominate electric vehicle battery manufacturing in the United States. This EV battery manufacturing capacity will facilitate the production of 10 to 13 million all-electric vehicles per year, positioning the United States as a global EV competitor. Thus, the above instances lead to the development and production of new power stations because of the growing demand for EVs, which boosts the demand for automotive LEDs in the country.
Understand The Key Trends Shaping This Market
Download PDF
OTHER KEY INDUSTRY TRENDS COVERED IN THE REPORT
- Increase in the number of households to drive the growth of the LED market
- Indirect customer financing and growing government incentives to purchase EVs to drive the LED market
- Reduction in imports from China to lead the growth of the LED lighting market in the country
- Construction and upgradation of new highways to support the growth of LED lighting
- About 75% of the population is expected to own a car, and the shifting trend toward larger vehicles to drive the growth of LED lighting
- 75% of the population have access to a car, and the use of headlights in automobiles leads to LED penetration
- Increase in the number of private-owned dwellings and government regulations to drive the market for LEDs
- LED penetration is driven by LED certification for commercial spaces, which increased by 30% in 2022
US Automotive LED Lighting Industry Overview
The US Automotive LED Lighting Market is moderately consolidated, with the top five companies occupying 52.43%. The major players in this market are GRUPO ANTOLIN IRAUSA, S.A., KOITO MANUFACTURING CO., LTD., Marelli Holdings Co., Ltd., OSRAM GmbH. and Stanley Electric Co., Ltd. (sorted alphabetically).
US Automotive LED Lighting Market Leaders
GRUPO ANTOLIN IRAUSA, S.A.
KOITO MANUFACTURING CO., LTD.
Marelli Holdings Co., Ltd.
OSRAM GmbH.
Stanley Electric Co., Ltd.
Other important companies include HELLA GmbH & Co. KGaA (FORVIA), Hyundai Mobis, Nichia Corporation, Signify (Philips), Valeo.
*Disclaimer: Major Players sorted in alphabetical order.
Need More Details on Market Players and Competitors?
Download PDF
US Automotive LED Lighting Market News
- March 2023: HELLA expands Black Magic auxiliary headlamp series with 32 new lightbars. Range expansion includes 14 lightbars with ECE approval for on-road use and 18 light-bars for off-road applications
- January 2023: HELLA brings FlatLight technology into series production as a daytime running light for the first time. The lighting concept is successfully transferred from the rear combination lamp to an application in the front area; series production starts in 2025.
- January 2023: Nichia Corporation and Infineon Technologies AG announced the joint development of a high-definition (HD) light engine with more than 16,000 micro-LEDs for headlight applications.
Free with this Report
We provide a complimentary and exhaustive set of data points on the country and regional level metrics that present the fundamental structure of the industry. Presented in the form of 40+ free charts, the sections cover difficult to find data on various countries on Automotive Production, Lighting Electricity Consumption, Road Network, Number of Stadiums, Number of Charging Stations among others.
US Automotive LED Lighting Market Report - Table of Contents
1. EXECUTIVE SUMMARY & KEY FINDINGS
2. REPORT OFFERS
3. INTRODUCTION
- 3.1 Study Assumptions & Market Definition
- 3.2 Scope of the Study
- 3.3 Research Methodology
4. KEY INDUSTRY TRENDS
- 4.1 Automotive Production
- 4.2 Population
- 4.3 Per Capita Income
- 4.4 Interest Rate For Auto Loans
- 4.5 Number Of Charging Stations
- 4.6 Number Of Automobile On-Road
- 4.7 Total Import Of LEDs
- 4.8 # Of Households
- 4.9 Road Networks
- 4.10 LED Penetration
-
4.11 Regulatory Framework
- 4.11.1 United States
- 4.12 Value Chain & Distribution Channel Analysis
5. MARKET SEGMENTATION (includes market size in Value in USD and Volume, Forecasts up to 2030 and analysis of growth prospects)
-
5.1 Automotive Utility Lighting
- 5.1.1 Daytime Running Lights (DRL)
- 5.1.2 Directional Signal Lights
- 5.1.3 Headlights
- 5.1.4 Reverse Light
- 5.1.5 Stop Light
- 5.1.6 Tail Light
- 5.1.7 Others
-
5.2 Automotive Vehicle Lighting
- 5.2.1 2 Wheelers
- 5.2.2 Commercial Vehicles
- 5.2.3 Passenger Cars
6. COMPETITIVE LANDSCAPE
- 6.1 Key Strategic Moves
- 6.2 Market Share Analysis
- 6.3 Company Landscape
-
6.4 Company Profiles (includes Global level Overview, Market level overview, Core Business Segments, Financials, Headcount, Key Information, Market Rank, Market Share, Products and Services, and analysis of Recent Developments)
- 6.4.1 GRUPO ANTOLIN IRAUSA, S.A.
- 6.4.2 HELLA GmbH & Co. KGaA (FORVIA)
- 6.4.3 Hyundai Mobis
- 6.4.4 KOITO MANUFACTURING CO., LTD.
- 6.4.5 Marelli Holdings Co., Ltd.
- 6.4.6 Nichia Corporation
- 6.4.7 OSRAM GmbH.
- 6.4.8 Signify (Philips)
- 6.4.9 Stanley Electric Co., Ltd.
- 6.4.10 Valeo
7. KEY STRATEGIC QUESTIONS FOR LED CEOS
8. APPENDIX
-
8.1 Global Overview
- 8.1.1 Overview
- 8.1.2 Porter’s Five Forces Framework
- 8.1.3 Global Value Chain Analysis
- 8.1.4 Market Dynamics (DROs)
- 8.2 Sources & References
- 8.3 List of Tables & Figures
- 8.4 Primary Insights
- 8.5 Data Pack
- 8.6 Glossary of Terms
List of Tables & Figures
- Figure 1:
- VOLUME OF AUTOMOTIVE PRODUCTION, MILLION, UNITED STATES, 2017 - 2030
- Figure 2:
- HUMAN POPULATION IN MILLION, NUMBERS, UNITED STATES, 2017 - 2030
- Figure 3:
- PER CAPITA INCOME, USD, UNITED STATES, 2017 - 2030
- Figure 4:
- INTEREST RATE FOR AUTO LOANS, %, UNITED STATES, 2017 - 2022
- Figure 5:
- COUNT OF CHARGING STATIONS, NUMBER, UNITED STATES, 2017 - 2030
- Figure 6:
- COUNT OF AUTOMOBILES ON-ROAD IN MILLION, NUMBERS, UNITED STATES, 2017 - 2030
- Figure 7:
- VALUE OF LED IMPORTS, USD MILLION, UNITED STATES, 2017 - 2030
- Figure 8:
- COUNT OF HOUSEHOLDS, MILLION, UNITED STATES, 2017 - 2030
- Figure 9:
- LENGTH OF ROAD NETWORKS, KM, UNITED STATES, 2017 - 2030
- Figure 10:
- LED PENETRATION, %, UNITED STATES, 2017 - 2030
- Figure 11:
- VOLUME SALES OF US AUTOMOTIVE LED LIGHTING MARKET, NUMBER, UNITED STATES, 2017 - 2030
- Figure 12:
- VALUE SALES OF US AUTOMOTIVE LED LIGHTING MARKET, USD, UNITED STATES, 2017 - 2030
- Figure 13:
- VOLUME SALES OF LED FIXTURES BY AUTOMOTIVE UTILITY LIGHTING, NUMBER, UNITED STATES, 2017 - 2030
- Figure 14:
- VALUE SALES OF LED FIXTURES BY AUTOMOTIVE UTILITY LIGHTING, USD, UNITED STATES, 2017 - 2030
- Figure 15:
- VALUE SHARE OF LED FIXTURES BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2017 - 2030
- Figure 16:
- VOLUME SHARE OF LED FIXTURES BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2017 - 2030
- Figure 17:
- VOLUME SALES OF LED FIXTURES IN DAYTIME RUNNING LIGHTS (DRL), NUMBER, UNITED STATES, 2017 - 2030
- Figure 18:
- VALUE SALES OF LED FIXTURES IN DAYTIME RUNNING LIGHTS (DRL), USD, UNITED STATES, 2017 - 2030
- Figure 19:
- VALUE SHARE OF DAYTIME RUNNING LIGHTS (DRL) BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 20:
- VOLUME SALES OF LED FIXTURES IN DIRECTIONAL SIGNAL LIGHTS, NUMBER, UNITED STATES, 2017 - 2030
- Figure 21:
- VALUE SALES OF LED FIXTURES IN DIRECTIONAL SIGNAL LIGHTS, USD, UNITED STATES, 2017 - 2030
- Figure 22:
- VALUE SHARE OF DIRECTIONAL SIGNAL LIGHTS BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 23:
- VOLUME SALES OF LED FIXTURES IN HEADLIGHTS, NUMBER, UNITED STATES, 2017 - 2030
- Figure 24:
- VALUE SALES OF LED FIXTURES IN HEADLIGHTS, USD, UNITED STATES, 2017 - 2030
- Figure 25:
- VALUE SHARE OF HEADLIGHTS BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 26:
- VOLUME SALES OF LED FIXTURES IN REVERSE LIGHT, NUMBER, UNITED STATES, 2017 - 2030
- Figure 27:
- VALUE SALES OF LED FIXTURES IN REVERSE LIGHT, USD, UNITED STATES, 2017 - 2030
- Figure 28:
- VALUE SHARE OF REVERSE LIGHT BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 29:
- VOLUME SALES OF LED FIXTURES IN STOP LIGHT, NUMBER, UNITED STATES, 2017 - 2030
- Figure 30:
- VALUE SALES OF LED FIXTURES IN STOP LIGHT, USD, UNITED STATES, 2017 - 2030
- Figure 31:
- VALUE SHARE OF STOP LIGHT BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 32:
- VOLUME SALES OF LED FIXTURES IN TAIL LIGHT, NUMBER, UNITED STATES, 2017 - 2030
- Figure 33:
- VALUE SALES OF LED FIXTURES IN TAIL LIGHT, USD, UNITED STATES, 2017 - 2030
- Figure 34:
- VALUE SHARE OF TAIL LIGHT BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 35:
- VOLUME SALES OF LED FIXTURES IN OTHERS, NUMBER, UNITED STATES, 2017 - 2030
- Figure 36:
- VALUE SALES OF LED FIXTURES IN OTHERS, USD, UNITED STATES, 2017 - 2030
- Figure 37:
- VALUE SHARE OF OTHERS BY AUTOMOTIVE UTILITY LIGHTING, %, UNITED STATES, 2022 VS 2030
- Figure 38:
- VOLUME SALES OF LED FIXTURES BY AUTOMOTIVE VEHICLE LIGHTING, NUMBER, UNITED STATES, 2017 - 2030
- Figure 39:
- VALUE SALES OF LED FIXTURES BY AUTOMOTIVE VEHICLE LIGHTING, USD, UNITED STATES, 2017 - 2030
- Figure 40:
- VALUE SHARE OF LED FIXTURES BY AUTOMOTIVE VEHICLE LIGHTING, %, UNITED STATES, 2017 - 2030
- Figure 41:
- VOLUME SHARE OF LED FIXTURES BY AUTOMOTIVE VEHICLE LIGHTING, %, UNITED STATES, 2017 - 2030
- Figure 42:
- VOLUME SALES OF LED FIXTURES IN 2 WHEELERS, NUMBER, UNITED STATES, 2017 - 2030
- Figure 43:
- VALUE SALES OF LED FIXTURES IN 2 WHEELERS, USD, UNITED STATES, 2017 - 2030
- Figure 44:
- VOLUME SALES OF LED FIXTURES IN COMMERCIAL VEHICLES, NUMBER, UNITED STATES, 2017 - 2030
- Figure 45:
- VALUE SALES OF LED FIXTURES IN COMMERCIAL VEHICLES, USD, UNITED STATES, 2017 - 2030
- Figure 46:
- VOLUME SALES OF LED FIXTURES IN PASSENGER CARS, NUMBER, UNITED STATES, 2017 - 2030
- Figure 47:
- VALUE SALES OF LED FIXTURES IN PASSENGER CARS, USD, UNITED STATES, 2017 - 2030
- Figure 48:
- MOST ACTIVE COMPANIES BY NUMBER OF STRATEGIC MOVES, COUNT, UNITED STATES, 2017 - 2030
- Figure 49:
- MOST ADOPTED STRATEGIES, COUNT, UNITED STATES, 2017 - 2030
- Figure 50:
- VALUE SHARE OF MAJOR PLAYERS, %, UNITED STATES, 2022
US Automotive LED Lighting Industry Segmentation
Daytime Running Lights (DRL), Directional Signal Lights, Headlights, Reverse Light, Stop Light, Tail Light, Others are covered as segments by Automotive Utility Lighting. 2 Wheelers, Commercial Vehicles, Passenger Cars are covered as segments by Automotive Vehicle Lighting.
- In 2020, automotive LED production decreased because of the COVID-19 pandemic, leading to an automotive semiconductor shortage. The supply chain was also being impacted by difficulties in gaining access to key materials because of the China-US trade war.
- In terms of value share, in 2023, others accounted for the majority of the share, followed by headlights (35.1%), directional signal lights (DSL) (12.7%), stoplights, and daytime running lights (DRL). The market share is expected to remain the same for all lighting during the study period, with a small reduction in others. With the rising accident trend, the penetration rate of fog LED lamps is anticipated to rise. In the United States, the number of motor vehicle deaths reached an estimated 46,000 in 2022. Compared to the pre-pandemic death rate, it increased by nearly 22%.
- In terms of volume share, in 2023, DSL accounted for the majority of the share (26.2%), followed by headlights (17.4%), others, and stoplights. The market share is expected to remain the same for all the lights during the forecast period, with a small reduction in DSLs.
- In terms of expansion and innovations, the United States is one of the significant auto-producing nations in the world. In 2022, the auto industry in the United States produced approximately 10.06 million motor vehicles. It includes passenger cars, light commercial vehicles, heavy trucks, buses and coaches. The key automotive manufacturers in the market are focusing on expanding electric vehicles. The Charging and Fueling Infrastructure Grant Program would grant USD 2.5 billion over five years. Thus, the growth in NEVs (neighborhood electric vehicles) would increase the penetration of automotive LEDs in the market.
| Automotive Utility Lighting | Daytime Running Lights (DRL) |
| Directional Signal Lights | |
| Headlights | |
| Reverse Light | |
| Stop Light | |
| Tail Light | |
| Others | |
| Automotive Vehicle Lighting | 2 Wheelers |
| Commercial Vehicles | |
| Passenger Cars |
Need A Different Region Or Segment?
Customize Now
Market Definition
- INDOOR LIGHTING - It incorporates all LED based lamps and fixtures/luminaire that are used to illuminate indoor section of residential, commercial, industrial buildings and agricultural lighting. LED offers efficient brightness with higher durability in comparison to other lighting technology.
- OUTDOOR LIGHTING - It incorporates the LED lighting fixtures that is used for illumination for exterior/outdoor illumination. For instance, LED lighting fixtures used to illuminate streets and highways, transport hubs, stadiums and other public places such as parking spaces.
- AUTOMOTIVE LIGHTING - It refers to the lighting fixtures installed for illumination and signaling purposes. It is used in both exterior and interior lighting of the vehicle. Headlamps, fog lamp, daytime running light (DRLs) are examples of exterior light whereas cabin light are interior lights.
- END USER - It refers to the end use application area where the LED fixture will be installed. For instance, in terms of indoor lighting, we have residential, commercial and industrial as end user category. For automotive lighting, primary end user considered are automotive manufacturers and aftermarket sale
| Keyword | Definition |
|---|---|
| Lumen | Lumen is a unit of luminous flux in the International System of Units that is equal to the amount of light given out through a solid angle by a source of one-candela intensity radiating equally in all directions. |
| Footcandle | A foot-candle (or foot-candle, fc, lm/ft2, or ft-c) is a measurement of light intensity. One foot-candle is defined as enough light to saturate a one-foot square with one lumen of light. |
| Colour Rendering Index (CRI) | Color Rendering Index (CRI) is a measurement of how natural colors render under an artificial white light source when compared with sunlight. The index is measured from 0-100, with a perfect 100 indicating that colors of objects under the light source appear the same as they would under natural sunlight. |
| Luminous flux | Luminous flux is a measure of the power of visible light produced by a light source or light fitting. It is measured in lumens (lm). |
| Annual Energy Cost | Annual Energy Cost means the average daily energy consumption multiplied by 365 (days per year), expressed in kilowatt hour per year (kWh/a). |
| Constant voltage drivers | Constant voltage drivers are designed for a single direct current (DC) output voltage. Most common constant voltage drivers (or Power Supplies) are 12VDC or 24VDC. An LED light that is rated for constant voltage usually specifies the amount of input voltage it needs to operate correctly. |
| Constant Current Driver | Constant current LED drivers are designed for a designated range of output voltages and a fixed output current (mA). LEDs that are rated to operate on a constant current driver require a designated supply of current usually specified in milliamps (mA) or amps (A). These drivers vary the voltage along an electronic circuit which allows current to remain constant throughout the LED system. |
| Minimum Energy Performance Standards (MEPS) | Minimum Energy Performance Standards specify the minimum level of energy performance that appliances and equipment must meet or exceed before they can supply or used for commercial purposes. |
| Luminous Efficacy | Luminous efficacy is a measurement commonly used in the lighting industry that indicates the ability of a light source to emit visible light using a given amount of power. |
| Solid State Lighting | Solid-state lighting (SSL) is a type of lighting that uses semiconductor light-emitting diodes (LEDs), organic light-emitting diodes (OLED), or polymer light-emitting diodes (PLED) as sources of illumination rather than electrical filaments, plasma (used in arc lamps such as fluorescent lamps), or gas. |
| Rated Lamp Life | Lamp life, also referred to as rated life, is the time in hours a lamp will last before a percentage of lamps will burn out. |
| Color Temperature | Colour temperature is a scale that measures how ‘warm’ (yellow) or ‘cool’ (blue) the light from a particular source is. It is measured in degrees of the Kelvin scale (abbreviated to K), and the higher the number, the ‘cooler’ the light. The lower the ‘K’ number, the ‘warmer’ the light. |
| Ingress Protection rating (IP rating) | The IP (Ingress Protection) rating of a bulb or light fixture declares the level of protection it has against dirt and water. |
| Fidelity Index | The general colour fidelity index, Rf, represents how closely the colour appearances of the entire sample set are reproduced (rendered) on average by a test light as compared to those under a reference illuminant. |
| Gamut Index | The gamut area is defined as “the area enclosed by a set of test color samples illuminated by a light source, in a two-dimensional chromaticity diagram or a plane of color space.”1 Within a defined color space, a “gamut” describes the subset of colors that can be perceived under specific lighting conditions. |
| Binning | In the lighting industry, the act of "binning" of LEDs is the process of sorting LEDs by certain characteristics, such as color, voltage, and brightness. |
| Accent lighting | Accent lighting, also called highlighting, emphasizes objects by focusing light directly on them. Accent lighting is used inside and outside the home to feature locations such as an entrance or to create dramatic effects. |
| Dimmable driver | A dimming driver has two functions: As a driver, it converts the 230V AC mains input to a low voltage DC output. As a dimmer, it reduces the amount of electrical energy flowing to the LEDs, thereby causing them to dim. |
| Flicker | Flicker is the repeated and frequent variation in the output of a light source over time. |
| Fluorescent | A property of materials defined as the ability to emit light after absorbing electromagnetic radiation such as visible or UV light. |
| Candela | The candela is the unit of luminous intensity in the International System of Units. It measures the light output per unit solid angle emitted from a light source in a specific direction. |
| LUX | Lux is used to measure the amount of light output in a given area - one lux is equal to one lumen per square meter. It enables us to measure the total "amount" of visible light present and the intensity of the illumination on a surface. |
| Uniformity (U0) | The uniformity of lighting has significant effects on visual performance in both indoor and outdoor areas. Uniformity (represented as U0) value can be found by dividing the minimum brightness (Emin) resulting from calculations according to the current lighting order, to the average brightness value (Eavg). |
| Visible Light Spectrum | The visible light spectrum is the segment of the electromagnetic spectrum that the human eye can view. More simply, this range of wavelengths is called visible light. Typically, the human eye can detect wavelengths from 380 to 700 nanometers. |
| Ambient Temperature | Ambient Temperature is the temperature of the air surrounding an electrical enclosure. |
| Current-controlled dimming control | Current-controlled dimming controls LED brightness by varying the applied current using a 0-10V dimmer. Current-controlled dimming is smooth and HD-video friendly. It can only dim to a minimum of 5% of light output. |
| Design Light Consortium | It is a partnership of energy efficiency stakeholders in the United States and Canada to “promote quality, performance and energy efficient lighting solutions for the commercial sector”. |
| Pulse Width Modulation | Pulse-width modulation, or pulse-duration modulation, is a method of controlling the average power delivered by an electrical signal. |
| Surface Mounted Device | A surface mount device (SMD) is an electronic device whose components are mounted or placed directly on the surface of a printed circuit board. |
| Alternating Current | Alternating current is an electric current which periodically reverses direction and changes its magnitude continuously with time, in contrast to direct current, which flows only in one direction. |
| Direct Current | Direct current (DC) is an electric current that is uni-directional, so the flow of charge is always in the same direction. |
| Beam Angle | Beam angle (also called beam spread) is a measure of how light is distributed. On any plane perpendicular to the centerline of the light, the beam angle is the angle between two rays where the light intensity is 50% of the maximum light intensity. |
| LED Based Solar High Mast Lighting Systems | A Solar LED High Mast Light is a raised source of High illumination lights (6~8 lights) and with high intensity on the middle of major junctions (Ring roads, Outer Ring roads), turned on or lit automatically in the absence of light (at specified timings or at periodic times, every night). |
| Surface Mounted Diode (SMD) LEDs | A surface mount diode is a type that emits light and is flat mounted and soldered onto a circuit board. |
| Chip on Board (COB) LEDs | A COB LED is basically multiple LED chips (usually 9 or more) glued directly onto a substrate by the manufacturer to form a single module. |
| Dual In-Line Package (DIP) LEDs | A dual in-line package (DIP or DIL) is an electronic component package with a rectangular case and two parallel rows of electrical connector pins. |
| Graphene LED Lights | A graphene LED light bulb is simply an LED light bulb where the filament has been coated in graphene. A graphene LED bulb is reported to be 10% more efficient than regular LED light bulbs and they are cheaper to manufacture and buy. |
| LED Corn Bulbs | LED Corn lights are designed as an energy efficient alternative to high intensity discharge (HID) and SON lamps. It uses a large number of LEDs on a metal structure to provide sufficient light. This arrangement of LEDs looks a lot like a corn cob, hence the name "corn light". |
| Per Capita Income | Per capita income or total income measures the average income earned per person in a given area in a specified year. It is calculated by dividing the area's total income by its total population. Per capita income is national income divided by population size. |
| Charging Stations | A charging station, also known as a charging station or electric vehicle utility, is a power supply that provides electrical energy for charging plug-in electric vehicles. |
| Headlight | A headlight is a light that is mounted on the front of a car and illuminates the road in front of it. Low beam and high beam LED headlights are additional categories for these LED headlights. |
| Day Time Running Light (DRLs) | A daytime running lamp is a white, yellow, or amber lighting device mounted on the front of a road-going motor vehicle or bicycle. |
| Directional Signal Light | Directional signal lights are the front and rear lights on an automobile that flash to show the direction of a turn. |
| Stop Light | A red light that is mounted to the back of a car and turns on when the brakes are used to show that the car is stopped. |
| Reverse Light | The reverse light is at the back of the vehicle to indicate its backward motion. |
| Tail Light | A red light that can be seen in the dark is mounted on the rear of a road vehicle. Stop, reverse, and directional signal lights are all part of it. |
| Fog Light | Bright lights in automobiles used to increase visibility on the road in foggy conditions or to warn other drivers of the presence of the vehicle. |
| Passenger Vehicle | A passenger vehicle is a road vehicle, other than a moped or a motorcycle, intended for the transportation of people and designed for up to 8 to 9 seats. |
| Commercial Vehicle | A commercial vehicle (Bus, Truck, Van) is any type of motor vehicle used to transport goods or pay passengers. |
| Two Wheelers (2W) | A two-wheeler is a vehicle that runs on two wheels. |
| Streets & Roadways | Both roads and streets refer to hard, flat surfaces on the ground on which vehicles, people, and animals can travel. Since streetways are usually in cities and towns, they often have houses and buildings on both sides. The roadway is in the countryside and sometimes passes through forests and fields |
| Horticulture Lighting | Horticulture is the science and art of sustainably growing, producing, marketing and using high quality, intensively cultivated food and ornamental plants. |
Need More Details on Market Definition?
Ask a Question
Research Methodology
Mordor Intelligence has followed the following methodology in all our data center reports.
- Step 1: Raw Data Collection: To understand the market, initially, all crtical data points were identified. Critical information about countries and regions of interest including Per-capita Income, Population, Automotive Production, Interest rate on Auto-Loans, Number of Automobiles on Road, Total LED Import, Lighting Electricity Consumption among others were recorded or estimated based on internal calculations.
- Step 2: Identify Key Variables: To build a robust forecasting model, key variables such as Number of Households, Automotive Production, Road Networks among others were identified. Through an iterative process, the variables required for the market forecast were set, and the model was built using these variables.
- Step 3: Build a Market Model: Based on data and critical industry trend data (variables), including LED pricing, LED penetration rate, and project macro and micor economic factors were utilized for building the market forecasting.
- Step 4: Validate and Finalize: In this crucial step, all market numbers and variables derived through an internal mathematical model were validated through an extensive network of primary research experts from all the markets studied. The respondents are selected across levels and functions to generate a holistic picture of the market studied.
- Step 5: Research Outputs: Syndicated Reports, Custom Consulting Assignments, Databases & Subscription Platforms
Get More Details On Research Methodology
Download PDF
80% of our clients seek made-to-order reports. How do you want us to tailor yours?
